AN ANALYTICAL MODEL FOR SWITCHED RELUCTANCE MACHINE WITH HIGHER NUMBER OF ROTOR POLES

With growing interest in renewable energy technology and hybrid electric vehi- cle systems owing to environmental concerns and depleting fossil fuel reserves, electric machines have received widespread attention as a key component in the successful im- plementation of high efficiency drives. Towards this goal, the last two years have seen a significant increase in research in permanent magnet-alternative machine topologies. This has primarily been because of growing concerns over foreign dependence for rare- earth materials and a dramatic increase in the cost of permanent magnets. Switched Reluctance Machine (SRM) has been one of the leading contenders in this category. It does not require any permanent magnets, and is very suitable for operation in harsh operating environments. Furthermore, this machine has simple construction and is highly fault-tolerant with one of the widest operating speed ranges. Nowadays, it has found wide application in the automotive, aerospace as well as domestic area. How- ever conventional SRM suffers from modeling complexity and torque ripple during the phase commutation with the same origin. Using the novel PD formula proposed at the Illinois Institute of Technology, a new family of machines has been developed with a significant improvement in torque ripple. Owing to its novel configuration, analytical models for the design of advanced driver system design have also not been developed. In this study, an analytical model for the novel 6/10 SRM has been proposed. The machine model is characterized using an inductance model utilizing truncated Fourier series as well as multi-order polynomial curve-fitting algorithm. The induc- tance model is extended to back-EMF and electromagnetic torque models on purpose of obtaining the whole information for every single operating point of the machine during dynamic operation. The effectiveness of the proposed concept has analyzed for a prototype machine in the laboratory and verified using Finite Element Analysis. From this study, an algorithm has been proposed to develop the analytical model for the family of SRMs with higher number of rotor poles.M.S. in Electrical Engineering, May 201