Add to ORKGThe present paper discusses preparation, testing and possible uses of new composites, which consists of commodity and engineering polymers such as polypropylene (PP) and polyamide (PA6) reinforced with waste Armenian tuff stone powder. The paper will discuss extrusion and blending of the materials using co-rotating twin screw extruder with the inclusion of compatibiliser for enhancing the properties of the composite. The microstructure, thermal and mechanical properties of the composites have been examined following injection moulding of tensile test samples with a view of using these composites for added value applications
The objectives of this study are to study the effect of recycled newspaper (RNP) and ammonium polyph...
The main purpose of this research is to determine the more specific nature of the physical and mech...
This paper presents the impact of accelerated aging on selected mechanical and thermal properties of...
The present paper discusses preparation, testing and possible uses of new composites, which consists...
In the frame of the Erasmus conference, the basis of the polymer composite materials and their produ...
###EgeUn###Pumice stone (P), which is as a cheap material, can be a good candidate for filling mater...
The article presents the results of research on polymer composites based on polypropylene filled wit...
This thesis represents production and characterization of highly filled polymer composites based on ...
Thermoplastic elastomer composites of polypropylene (PP)/waste tyre dust (WTD)/kenaf powder (KNFp) w...
The results of the investigations into the technological formation of new wear-resistant polymer com...
In this work, the effect of reinforcement of the iPP with ceramic waste (CW), and the use of maleic ...
Composites of polypropylene (PP) reinforced with organic modified montmorillonite (MMT) (4 wt%) and ...
In the increasingly competitive market, the survival of the industries that manufacture components o...
Short basalt fibre (BF) reinforced polypropylene/polyamide (PP/PA) blends were prepared by homogeniz...
This present chapter describes the manufacturing technique and properties of coir fibre-reinforced p...
The objectives of this study are to study the effect of recycled newspaper (RNP) and ammonium polyph...
The main purpose of this research is to determine the more specific nature of the physical and mech...
This paper presents the impact of accelerated aging on selected mechanical and thermal properties of...
The present paper discusses preparation, testing and possible uses of new composites, which consists...
In the frame of the Erasmus conference, the basis of the polymer composite materials and their produ...
###EgeUn###Pumice stone (P), which is as a cheap material, can be a good candidate for filling mater...
The article presents the results of research on polymer composites based on polypropylene filled wit...
This thesis represents production and characterization of highly filled polymer composites based on ...
Thermoplastic elastomer composites of polypropylene (PP)/waste tyre dust (WTD)/kenaf powder (KNFp) w...
The results of the investigations into the technological formation of new wear-resistant polymer com...
In this work, the effect of reinforcement of the iPP with ceramic waste (CW), and the use of maleic ...
Composites of polypropylene (PP) reinforced with organic modified montmorillonite (MMT) (4 wt%) and ...
In the increasingly competitive market, the survival of the industries that manufacture components o...
Short basalt fibre (BF) reinforced polypropylene/polyamide (PP/PA) blends were prepared by homogeniz...
This present chapter describes the manufacturing technique and properties of coir fibre-reinforced p...
The objectives of this study are to study the effect of recycled newspaper (RNP) and ammonium polyph...
The main purpose of this research is to determine the more specific nature of the physical and mech...
This paper presents the impact of accelerated aging on selected mechanical and thermal properties of...