It was studied the influence of individual parameters and complex of factors on consumption of coke and found that use of the offered modes will allow to cut expenses coke to 190-200 kg/t of pig-iron on BF-9 AMKR and BF-5 “Severstal”. Use of effective technology of pulverized coal injection should be accompanied by the development of additional and alternative technologies. In particular, attention should be drawn on injecting of coke-oven gas and the products of gasification of low-grade coal, as well as the charging in blast furnaces of specially prepared lump anthracite
The objective of this article is the selection of cokemaking technology within an Iron & Steel W...
Efficiency of using of pulverized coal injection (PCI) in blast furnace smelting depends directly on...
The article considers a mathematical model of combustion zone of blast furnace working with the use ...
The system of discrete material and thermal balances in the radial annular cross-sections for 12 ver...
Blast melting is one of the few industrial technologies that preserve the essence and significance b...
The system of discrete material and thermal balances in the radial annular cross-sections for 12 ver...
The world production of hot metal and pig iron in 2012 reached 1.3 billion tons. More than 500 milli...
Abstract Process analyses foster opportunities for identifying losses during the production process ...
It is shown based on studies of the changes in the composition of the gases and temperature in the p...
The consumption of coal and coke in the blast furnace is met on the one hand by the market or on the...
The reduction of energy consumption in the blast furnace is still the subject of investigations usin...
Purpose. Using the conical backfilling system and principles of thermodynamic conversion was...
In the paper behavior of the blast-furnace coke in the high temperature was presented. Comparative a...
Research Doctorate - Doctor of Philosophy (PhD)The economic benefits of pulverised coal injection (P...
Ninety-eight percent of the pig iron produced in the world is made in blast furnaces. Pig-iron smelt...
The objective of this article is the selection of cokemaking technology within an Iron & Steel W...
Efficiency of using of pulverized coal injection (PCI) in blast furnace smelting depends directly on...
The article considers a mathematical model of combustion zone of blast furnace working with the use ...
The system of discrete material and thermal balances in the radial annular cross-sections for 12 ver...
Blast melting is one of the few industrial technologies that preserve the essence and significance b...
The system of discrete material and thermal balances in the radial annular cross-sections for 12 ver...
The world production of hot metal and pig iron in 2012 reached 1.3 billion tons. More than 500 milli...
Abstract Process analyses foster opportunities for identifying losses during the production process ...
It is shown based on studies of the changes in the composition of the gases and temperature in the p...
The consumption of coal and coke in the blast furnace is met on the one hand by the market or on the...
The reduction of energy consumption in the blast furnace is still the subject of investigations usin...
Purpose. Using the conical backfilling system and principles of thermodynamic conversion was...
In the paper behavior of the blast-furnace coke in the high temperature was presented. Comparative a...
Research Doctorate - Doctor of Philosophy (PhD)The economic benefits of pulverised coal injection (P...
Ninety-eight percent of the pig iron produced in the world is made in blast furnaces. Pig-iron smelt...
The objective of this article is the selection of cokemaking technology within an Iron & Steel W...
Efficiency of using of pulverized coal injection (PCI) in blast furnace smelting depends directly on...
The article considers a mathematical model of combustion zone of blast furnace working with the use ...