Add to ORKGA new method of studying thermal-gradient-induced lensing in laser crystals is reported. The method is applied to an optically dense laser medium, ErTmHo:YAG, and the temporal behavior of the flash-lamp-pump-induced temperature distribution is determined during and after pumping. Data for high-repetition-rate pumping are also presented
We measured the thermal distortion induced on an optical probe beam passing through a diode-end-pump...
The initial processes of the refractive index change in a focal region of a femtosecond laser pulse ...
In this thesis, analysis of thermal effects and various approaches for their mitigation in diode end...
A new method of studying thermal-gradient-induced lensing in laser crystals is reported. The method ...
A new method of studying thermal-gradient-induced lensing in laser crystals is reported. The method ...
A new method is presented for spatially resolved thermal lensing measurements using multiple narrow ...
Thermal lensing is one of the most important factors that can affect the performance of high-power s...
The end-pumped solid-state laser is a mature design architecture exploited for many scientific, indu...
In this work time resolved thermal lens measurements were carried out in Nd-doped yttrium aluminum g...
The compensation of thermal lensing in laser optics for application in the high power domain is an u...
D.G. Lancaster and J.M. Daweshttp://www.elsevier.com/wps/find/journaldescription.cws_home/30464/desc...
International audienceThis work presents an original, comparative study between two optical techniqu...
Theoretical and experimental results are reported on the thermal lensing effect caused by the radial...
Nm.An experimental setup was developed for thermal lensing measurements in the anisotropic di-ode-pu...
A Shack–Hartmann wavefront sensor was used to measure thermal lensing in diode-end-pumped Yb-doped G...
We measured the thermal distortion induced on an optical probe beam passing through a diode-end-pump...
The initial processes of the refractive index change in a focal region of a femtosecond laser pulse ...
In this thesis, analysis of thermal effects and various approaches for their mitigation in diode end...
A new method of studying thermal-gradient-induced lensing in laser crystals is reported. The method ...
A new method of studying thermal-gradient-induced lensing in laser crystals is reported. The method ...
A new method is presented for spatially resolved thermal lensing measurements using multiple narrow ...
Thermal lensing is one of the most important factors that can affect the performance of high-power s...
The end-pumped solid-state laser is a mature design architecture exploited for many scientific, indu...
In this work time resolved thermal lens measurements were carried out in Nd-doped yttrium aluminum g...
The compensation of thermal lensing in laser optics for application in the high power domain is an u...
D.G. Lancaster and J.M. Daweshttp://www.elsevier.com/wps/find/journaldescription.cws_home/30464/desc...
International audienceThis work presents an original, comparative study between two optical techniqu...
Theoretical and experimental results are reported on the thermal lensing effect caused by the radial...
Nm.An experimental setup was developed for thermal lensing measurements in the anisotropic di-ode-pu...
A Shack–Hartmann wavefront sensor was used to measure thermal lensing in diode-end-pumped Yb-doped G...
We measured the thermal distortion induced on an optical probe beam passing through a diode-end-pump...
The initial processes of the refractive index change in a focal region of a femtosecond laser pulse ...
In this thesis, analysis of thermal effects and various approaches for their mitigation in diode end...