The diffusion coefficient of sulfur in liquid iron saturated with carbon has been measured in the temperature range from 1, 390°to 1, 560℃ by using radioactive sulfur S^. It was found to be 2.9-3.6×10^ cm^2/sec and its dependency on temperature was expressed as follows : D=2.8×10^ exp (-3, 800/T) The values of the diffusion coeofficient are lower than those of the same concentration in iron-sulfur binary solution. The decrease of the diffusion coefficient by the presence of carbon can be explained partly as due to the fact that the decrease of activity coefficient of sulfur with concentration is larger than that in binary solution
Evaporative loss of sulfur from Fe-C-0.1 mass% S alloys was investigated using electroma...
The rate of transfer of sulphur across a metal-slag interface under reducing condition was studied a...
The chemical diffusion coefficient of sulfur in the ternary slag of composition 51.5 pct CaO-9.6 pct...
The diffusion coefficient of sulfur in liquid iron has been measured at the temperature range from 1...
The diffusion coefficients of silicon, sulfur and manganese in liquid iron were measured. At low con...
Diffusion coefficients of silicon and manganese in liquid iron (carbon-saturated) were determined in...
As the first step in the study on the kinetics of desulfurization of iron by slag, the rate of diffu...
Activity of sulphur in liquid iron was determined by measuring the value proportional to the rate of...
224 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1954.U of I OnlyRestricted to the ...
The method of restricted diffusion has been applied to aqueous sulfuric acid in order to determine d...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
The restricted diffusion method was used to measure the differential diffusion coefficient of sulfur...
Evaporative loss of sulfur from Fe-C-0.1 mass% S alloys was investigated using electroma...
Evaporative loss of sulfur from Fe-C-0.1 mass% S alloys was investigated using electroma...
The rate of transfer of sulphur across a metal-slag interface under reducing condition was studied a...
The chemical diffusion coefficient of sulfur in the ternary slag of composition 51.5 pct CaO-9.6 pct...
The diffusion coefficient of sulfur in liquid iron has been measured at the temperature range from 1...
The diffusion coefficients of silicon, sulfur and manganese in liquid iron were measured. At low con...
Diffusion coefficients of silicon and manganese in liquid iron (carbon-saturated) were determined in...
As the first step in the study on the kinetics of desulfurization of iron by slag, the rate of diffu...
Activity of sulphur in liquid iron was determined by measuring the value proportional to the rate of...
224 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1954.U of I OnlyRestricted to the ...
The method of restricted diffusion has been applied to aqueous sulfuric acid in order to determine d...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
Experimental work has involved the fabrication of impervious slip-cast CaO crucibles, measurement of...
The restricted diffusion method was used to measure the differential diffusion coefficient of sulfur...
Evaporative loss of sulfur from Fe-C-0.1 mass% S alloys was investigated using electroma...
Evaporative loss of sulfur from Fe-C-0.1 mass% S alloys was investigated using electroma...
The rate of transfer of sulphur across a metal-slag interface under reducing condition was studied a...
The chemical diffusion coefficient of sulfur in the ternary slag of composition 51.5 pct CaO-9.6 pct...