Wind farm layout optimization by using definite point selection and genetic algorithm

At present, wind energy industry is facing major design constraints in boosting the power output. These can be overcome by setting up the right turbine at the right place. This paper proposes an optimized layout design of a wind farm by using Definite Point selection(DPS) and genetic algorithm, which can minimize the cost per unit power and minimum wake effects, while sustaining the obligatory space between adjacent turbines for operation safety. The existing cost per unit power can be reduced by changing the dimensions of wind farm with constant area. In this study, the velocity deficits caused by the wakes of each turbine were calculated by using Jensens wake model. The total area of wind farm 2 Km x 2 Km was divided into 10x10 cells with each cell having dimensions 200 m x 200 m. The results showed that power output of the wind farm by using the same area in different dimension was increased even when the total numbers of wind turbines were the same. It was observed that 32 wind turbines in 2 Km x 2 Km area could produce a total power of 16,251.56 kW with fitness value of 0.001537. The present research results had been validated using the results from previous studies