A compact proton synchrotron with a circumference of 11.9m is being developed for the medical radiotherapy. The synchrotron acceleration system is required to be of a wide bandwidth with the frequency sweeping from 1.64MHz to 14.26MHz, and a high gradient with the maximum acceleration voltage of 20kV. The prototype of the rf acceleration system has been developed. The rf cavity consists of 2 cells loaded with 4 high-permeability magnetic alloy cores in each cell, and a push-pull power amplifier with two 35kW tetrode tubes is used to drive the 2 cells of the cavity in parallel. The test results and design values of the rf cavity and power amplifier will be presented.APAC\u2704 Organizing Committe
A proton synchrotron which can accelerate protons up to 370 MeV with the beam current of 10 nA is st...
A 7.5 MHz RF cavity and power amplifier have been built and tested at Fermilab as part of the proton...
A non-resonant rf cavity loaded with amorphous alloy cores has been designed and tested. The cavity ...
A compact proton synchrotron with a circumference of 11.9m is being developed for the medical radiot...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The 200MeV proton synchrotron of circumference of 9.54m is being developed for medical radiotherapy....
Calculation results of the capture, acceleration and special beam preparation before the slow extrac...
We have developed an RF acceleration system for a medical proton synchrotron. The RF cavity is a tun...
We have developed an RF acceleration system for a medical proton synchrotron. The RF cavity is a tun...
A RF acceleration system has been designed for the Joint Project for High-Intensity Proton Accelerat...
A compact proton and carbon ion synchrotron development program is approved in 2001 to promote the a...
A proton and light-ion medical synchrotron is characterised by a large frequency swing for the RF be...
The basic design of a compact proton accelerator system for cancer therapy is described. The system ...
A proton synchrotron which can accelerate protons up to 370 MeV with the beam current of 10 nA is st...
A 7.5 MHz RF cavity and power amplifier have been built and tested at Fermilab as part of the proton...
A non-resonant rf cavity loaded with amorphous alloy cores has been designed and tested. The cavity ...
A compact proton synchrotron with a circumference of 11.9m is being developed for the medical radiot...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The rf system has been developed for the compact medical proton synchrotron. The rf cavity consists ...
The 200MeV proton synchrotron of circumference of 9.54m is being developed for medical radiotherapy....
Calculation results of the capture, acceleration and special beam preparation before the slow extrac...
We have developed an RF acceleration system for a medical proton synchrotron. The RF cavity is a tun...
We have developed an RF acceleration system for a medical proton synchrotron. The RF cavity is a tun...
A RF acceleration system has been designed for the Joint Project for High-Intensity Proton Accelerat...
A compact proton and carbon ion synchrotron development program is approved in 2001 to promote the a...
A proton and light-ion medical synchrotron is characterised by a large frequency swing for the RF be...
The basic design of a compact proton accelerator system for cancer therapy is described. The system ...
A proton synchrotron which can accelerate protons up to 370 MeV with the beam current of 10 nA is st...
A 7.5 MHz RF cavity and power amplifier have been built and tested at Fermilab as part of the proton...
A non-resonant rf cavity loaded with amorphous alloy cores has been designed and tested. The cavity ...