We verified that the two-step etching method of the combination of pre-etching with PEW (Potassium hydroxide + Ethanol + Water) solution and post-etching with NaOH solution makes drastic improvement of charge resolution for high Z/b particles (Z: nuclear charge, b: velocity) in CR-39 nuclear track detectors. Detectors were exposed to several heavy ions from Ne to Kr with the energies of <500 MeV/n at HIMAC(Heavy Ion Medical Accelerator in Chiba). The optimum etching conditions were determined to be a preetching of PEW solution with concentration of 60 wt% of ethanol for 40 min and a post-etching of 7N NaOH for 12 h. This resulted in a charge resolution for Kr (Z/b~60) of 0.18 c.u. (charge units). The Z/b detection threshold was increased as...
We have studied the performance of a newly-commercialized CR-39 plastic nuclear track detector (PNTD...
We evaluate radon/thoron and its progeny concentration using passive-type monitors using CR-39 plate...
We developed a new method for determining the bulk etch rate velocity based on both cone height and ...
The two-step etching method using PEW (Potassium hydroxide + Ethanol + Water) and NaOH solutions was...
It is necessary to develop a track detector with higher detection threshold and high charge resoluti...
CR-39 PNTDs are commonly used as the heavy ion detectors with the LET detection threshold of > ~5 ke...
The charge resolution (delta Z) for heavy ions (nuclear charge: Z < 40) of 0.1-1 GeV/n energy in CR-...
The chemical compositions of ultra heavy (UH, Z ³ 30) nuclei in galactic cosmic rays (GCRs) cou...
Charge identification of trans-iron nuclei (nuclear charge: Z≥ 30) using CR-39 plastic nuclear track...
Charge identification of trans-iron nuclei (nuclear charge: Z>=30) using CR-39 plastic nuclear track...
none13Several improvements were made for Nuclear Track Detectors (NTDs) used for environmental studi...
Several improvements were made for Nuclear Track Detectors (NTDs) used for environmental studies and...
New calibrations of CR39 and Makrofol nuclear track detectors have been obtained using 158 A GeV Pb8...
A time-efficient surface grinding and polishing procedure was developed to remove noise pitting asso...
AbstractTotal charge changing cross-sections of 300 MeV/A Fe26+ ion beam in Al and combined media of...
We have studied the performance of a newly-commercialized CR-39 plastic nuclear track detector (PNTD...
We evaluate radon/thoron and its progeny concentration using passive-type monitors using CR-39 plate...
We developed a new method for determining the bulk etch rate velocity based on both cone height and ...
The two-step etching method using PEW (Potassium hydroxide + Ethanol + Water) and NaOH solutions was...
It is necessary to develop a track detector with higher detection threshold and high charge resoluti...
CR-39 PNTDs are commonly used as the heavy ion detectors with the LET detection threshold of > ~5 ke...
The charge resolution (delta Z) for heavy ions (nuclear charge: Z < 40) of 0.1-1 GeV/n energy in CR-...
The chemical compositions of ultra heavy (UH, Z ³ 30) nuclei in galactic cosmic rays (GCRs) cou...
Charge identification of trans-iron nuclei (nuclear charge: Z≥ 30) using CR-39 plastic nuclear track...
Charge identification of trans-iron nuclei (nuclear charge: Z>=30) using CR-39 plastic nuclear track...
none13Several improvements were made for Nuclear Track Detectors (NTDs) used for environmental studi...
Several improvements were made for Nuclear Track Detectors (NTDs) used for environmental studies and...
New calibrations of CR39 and Makrofol nuclear track detectors have been obtained using 158 A GeV Pb8...
A time-efficient surface grinding and polishing procedure was developed to remove noise pitting asso...
AbstractTotal charge changing cross-sections of 300 MeV/A Fe26+ ion beam in Al and combined media of...
We have studied the performance of a newly-commercialized CR-39 plastic nuclear track detector (PNTD...
We evaluate radon/thoron and its progeny concentration using passive-type monitors using CR-39 plate...
We developed a new method for determining the bulk etch rate velocity based on both cone height and ...