A Reduced Order Model for Nonlinear Dynamics of Mistuned Bladed Disks with Shroud Friction Contacts

A new reduced order modeling technique for nonlinear vibration analysis of mistuned bladed disks with shrouds is presented. The developed reduction technique employs two component mode synthesis methods, namely, the Craig-Bampton (CB) method followed by a modal synthesis based on loaded interface (LI) modeshapes (Benfield and Hruda). In the new formulation, the fundamental sector is divided into blade and disk components. The CB method is applied to the blade, where nodes lying on shroud contact surfaces and blade–disk interfaces are retained as master nodes, while modal reductions are performed on the disk sector with LIs. The use of LI component modes allows removing the blade–disk interface nodes from the set of master nodes retained in the reduced model. The result is a much more reduced order model (ROM) with no need to apply any secondary reduction. In the paper, it is shown that the ROM of the mistuned bladed disk can be obtained with only single-sector calculation, so that the full finite element model of the entire bladed disk is not necessary. Furthermore, with the described approach, it is possible to introduce the blade frequency mistuning directly into the reduced model. The nonlinear forced response is computed using the harmonic balance method and alternating frequency/time domain approach. Numerical simulations revealed the accuracy, efficiency, and reliability of the new developed technique for nonlinear vibration analysis of mistuned bladed disks with shroud friction contacts