CFD simulation of nanofiber-enhanced air filter media

The first step in a CFD analysis of filter media flow is to create a computational domain geometry which imitates the simulated media as closely as is practical. The media in the present study combined a relatively flat web of nanofibers with a cellulosic fiber support media. A CFD grid suited to calculating the flow patterns through the cellulosic media structure would be far too coarse to simulate flow around the nanofiber web elements. This scale difference forces some assumption about the interaction between the media layers. Our models are limited to two dimensions, representing cross-sections cut through the media. Our initial studies modeled the nanofiber web alone, on the assumption that the flow around the nanofibers is not greatly influenced by the presence of the downstream cellulosic fibers. Our image-analysis technique samples the distribution of fiber diameters by scribing parallel lines across the image. The diameter of the web element at each line/fiber crossing is tabulated. An estimate is made of the maximum width on the image for which the web element cross-section can be considered circular. We make the assumption that the relatively flat web elements linking round sections have oval cross-sections, all of the same thickness. We found that the distribution of web element widths is “doubly-truncated log-normal”, meaning that both lower and upper limits to the widths exist. This geometry was used with a CFD code to calculate particle capture, and compared to results of tests on the actual media