CAD-CAE integration and isogeometric analysis: trivariate multipatch and applications

This PhD thesis is focused on the issues related to one of the critical steps during the lifecycle of a product design and manufacturing process: the transition between the geometrical and functional definition of a product, and the virtual prototyping with numerical simulations, also known as CAD (Computer-Aided Design) / CAE (Computer-Aided Engineering) transition. The isogeometric methodologies developed by Hughes et Al. [1, 2] has the ambition to close the gap in CAD/CAE integration, allowing the two environments to underlay on the same framework, taking advantage of the isoparametric concept, widely used in Finite Elements world, coupled with the Non-Uniform Rational B-Splines (NURBS) that are a standard in CAD systems in the mathematical representation of geometries. Even though the first paper was published 10 years ago, the method is not yet used in industrial applications and only few commercial software are able to handle isogeometric elements. In this thesis a step towards the possibility of application in industry by developing a multi-patch coupling method where the geometry at the interface does not allow a compatible mesh. This improvement opens new frontiers for applications in both static and dynamic solutions. Another issue that is analysed in this thesis is the possibility to improve the geometry-to-analysis integration by conversion of the information that comes from CAD software, in terms of representation of the external surfaces, to solid information that is necessary to be suitable for a structural simulation