National regulations on waste management do not seem adequate to cope with the fusion case. The paper shows the relevance of this problem, showing some aspects of application of national radioactive waste management practices and regulations to fusion. In particular, the case of Italian waste management regulations is considered. The waste management strategy proposed in the SEAFP and PPCS studies, based upon recycling and clearance techniques, is compared to Italian national regulations. If those regulations were applied to fusion, a relevant part of the fusion radioactive materials should be classified in the Italian High Level Waste category. Also in the case of other national regulations, fusion waste would be rated mostly in the local ...
In the absence of official standards and guidelines for nuclear fusion plants, fusion designers adop...
A waste management strategy for fusion activated materials aimed at reducing the amount of permanent...
Some technological problems of radioactive fusion materials management are being addressed in the pa...
National regulations on waste management do not seem adequate to cope with the fusion case. The pape...
Ignitor is a nuclear fusion reactor aimed at studying Deuterium-Tritium plasmas. We have applied the...
Ignitor is a nuclear fusion reactor aimed at studying Deuterium-Tritium plasmas. We have applied the...
This paper presents fusion waste management studies carried out under the long-term actions on Safet...
Ignitor is a nuclear fusion experiment aimed at studying Deuterium-Tritium plasmas. If European prop...
Under the framework of the European Power Plant Conceptual Study (PPCS), studies were carried out on...
This chapter outlines the attractive environmental features of nuclear fusion, presents an integral ...
In order to maximize the environmental benefits of fusion power generation, it is important to clea...
In Italy, after the 1987 decision to shut-down the existing nuclear power plants, the radioac-tive w...
Under the framework of the European Power Plant Conceptual Study (PPCS), studies were carried out o...
This study addresses an integrated approach to the management procedures for active mate-rials follo...
Future fusion reactors will generate waste during operation and decommissioning. In contrast to fiss...
In the absence of official standards and guidelines for nuclear fusion plants, fusion designers adop...
A waste management strategy for fusion activated materials aimed at reducing the amount of permanent...
Some technological problems of radioactive fusion materials management are being addressed in the pa...
National regulations on waste management do not seem adequate to cope with the fusion case. The pape...
Ignitor is a nuclear fusion reactor aimed at studying Deuterium-Tritium plasmas. We have applied the...
Ignitor is a nuclear fusion reactor aimed at studying Deuterium-Tritium plasmas. We have applied the...
This paper presents fusion waste management studies carried out under the long-term actions on Safet...
Ignitor is a nuclear fusion experiment aimed at studying Deuterium-Tritium plasmas. If European prop...
Under the framework of the European Power Plant Conceptual Study (PPCS), studies were carried out on...
This chapter outlines the attractive environmental features of nuclear fusion, presents an integral ...
In order to maximize the environmental benefits of fusion power generation, it is important to clea...
In Italy, after the 1987 decision to shut-down the existing nuclear power plants, the radioac-tive w...
Under the framework of the European Power Plant Conceptual Study (PPCS), studies were carried out o...
This study addresses an integrated approach to the management procedures for active mate-rials follo...
Future fusion reactors will generate waste during operation and decommissioning. In contrast to fiss...
In the absence of official standards and guidelines for nuclear fusion plants, fusion designers adop...
A waste management strategy for fusion activated materials aimed at reducing the amount of permanent...
Some technological problems of radioactive fusion materials management are being addressed in the pa...