The environmental impacts of calcium chloride addition to cement on reinforcing steel corrosion

An alternative use of a specific type of cement for a particular purpose, usually we can change some properties of available cement by using the appropriate additions, with some negative side effects in some cases. In this research have been suggested values ??of calcium chloride(CaCl2) additions for use in concrete admixtures as an agent factor in accelerating the process of cement setting, to clarify the extent of the negative impacts that could be induced, such as alkalinity decline of solution and the impact of the chemical composition of used cement on reinforcing steel. Chloride ion present in low alumina cement mortar was detected quickly, while it needed to increase calcium chloride content to double in moderate alumina cement mortar. The results showed that the depth of carbonation when samples of different composition and with various w/c ratio treated by stream was faster in low ammonia cement mortar from moderate ammonia and faster in mortar poor than in mortar rich, In addition, depth of carbonation increased when the calcium chloride content in cement was very small. Electrical potential of steel in cement mortar inversely proportional with increasing calcium chloride content and with increasing in water/cement ratio and increasing sand content in cement mortar medium ammonia. The lowest level of steel oxidation observed in mortar consisting of cement medium ammonia and the rate of corrosion increases when samples treated by stream in all cases. Keywords: Calcium Chloride, Oxidation, Reinforcement, Stream Treatment, Carbonation, Concrete admixtures, Electric potentia