Add to ORKGBlend of polyvinyl acetate (PVA) and Toluene diisocyanate (TDI) were mixed with different percentages by weight of sulfonated phenol-formaldehyde (SPF) foam of prepared sulfonated phenol-formaldehyde resin. The measured mechanical properties such as the tensile modulus (Et) values are (107, 43.7, 84.7, 424 and 165) MPa, for samples (1, 6, 7, 8 and 9). Tensile strength (?M) before break are (0.923, 1.21, 5.56, 6.43 and 8.65) MPa, maximum force applied on the specimen number (9) is 355 N. More information of the article can be found in the full paper
The purpose of the study is to manufacture soy hull augmented polyurethane foams and study the physi...
Pada penelitian ini dilakukan upaya untuk meningkatkan ketangguhan mekanis Unsaturated Polyester (UP...
The addition of small molecules can significantly influence the macroscopic mechanical property and ...
Blend of polyvinyl acetate (PVA) and Toluene diisocyanate (TDI) were mixed with different percentage...
Phenol formaldehyde was filled with Envirospheres, ceramic hollow spheres (SLG) to increase the tens...
This work was designed to determine the mechanical properties and static cushioning performance of p...
Poly (vinyl alcohol) (PVA), is the largest synthetic water-soluble polymer produced in the world bas...
Hypothesis: Energy-absorbing materials and structures have many uses, especially in protecting human...
The polymer Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate), hereafter referred to as PEDOT:...
A commercial phenol formaldehyde based resole thermosetting resin (Hexion “J2027L”) was filled with ...
This paper describes the performance of poly(vinyl alcohol) (PVOH) fibres and their composites. PVOH...
This study aims to evaluate the chemical composition, physical and mechanical properties of fibre-re...
In this study, Polypropylene (PP) foam materials were used with injection parameters such as melting...
Thermoplastic composites go toward making an increasingly greater percentage of all manufacturing po...
Copyright © 2013 F. O. Aramide et al. This is an open access article distributed under the Creative ...
The purpose of the study is to manufacture soy hull augmented polyurethane foams and study the physi...
Pada penelitian ini dilakukan upaya untuk meningkatkan ketangguhan mekanis Unsaturated Polyester (UP...
The addition of small molecules can significantly influence the macroscopic mechanical property and ...
Blend of polyvinyl acetate (PVA) and Toluene diisocyanate (TDI) were mixed with different percentage...
Phenol formaldehyde was filled with Envirospheres, ceramic hollow spheres (SLG) to increase the tens...
This work was designed to determine the mechanical properties and static cushioning performance of p...
Poly (vinyl alcohol) (PVA), is the largest synthetic water-soluble polymer produced in the world bas...
Hypothesis: Energy-absorbing materials and structures have many uses, especially in protecting human...
The polymer Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate), hereafter referred to as PEDOT:...
A commercial phenol formaldehyde based resole thermosetting resin (Hexion “J2027L”) was filled with ...
This paper describes the performance of poly(vinyl alcohol) (PVOH) fibres and their composites. PVOH...
This study aims to evaluate the chemical composition, physical and mechanical properties of fibre-re...
In this study, Polypropylene (PP) foam materials were used with injection parameters such as melting...
Thermoplastic composites go toward making an increasingly greater percentage of all manufacturing po...
Copyright © 2013 F. O. Aramide et al. This is an open access article distributed under the Creative ...
The purpose of the study is to manufacture soy hull augmented polyurethane foams and study the physi...
Pada penelitian ini dilakukan upaya untuk meningkatkan ketangguhan mekanis Unsaturated Polyester (UP...
The addition of small molecules can significantly influence the macroscopic mechanical property and ...