Add to ORKG1.1 The objective of this senior design project was to design and build an aerial drone with a landing gear system that would allow leveling and take off from a sloped terrain. The drone should be able to level on a slope with a maximum incline of 20 degrees and the leveling process should not exceed 30 seconds. In addition, the leveling system must be automatic and deployed using the flight controller
This final design review includes an overview of our project and the steps we have taken to create o...
Master of ScienceDepartment of Computing and Information SciencesWilliam H. HsuClustering in data mi...
In this thesis, an autonomous driving robot has been proposed and built based on a two-wheel Segway ...
The American Society of Mechanical Engineers (ASME) 2016 Student Design Competition Challenge is to ...
The problem we spent a semester working on was building a remote controlled glider which used morphi...
This is an overview of our project to design an expandable brush. This brush is designed to be versa...
The automated syringe filling system is a bench-top device designed to remove human error when filli...
Lightweight Innovations for Tomorrow (LIFT) is a consortium with several industries, universities an...
In this Final Design Review, the team outlines the general scope of the ARES Cleaning System project...
This report is intended to outline all relevant background information, decisions, and design direct...
The design-to-prototype process for a One Knee Stair Negotiator, designed to reduce or eliminate the...
The objective of this project was to design, build, and test a rotating binding-to-snowboard interfa...
The Final Design Review (FDR) reports on the senior design project undertaken by a mechanical engine...
In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable l...
Local scour is a major cause of concern for the stability of bridge piers and the safety of the publ...
This final design review includes an overview of our project and the steps we have taken to create o...
Master of ScienceDepartment of Computing and Information SciencesWilliam H. HsuClustering in data mi...
In this thesis, an autonomous driving robot has been proposed and built based on a two-wheel Segway ...
The American Society of Mechanical Engineers (ASME) 2016 Student Design Competition Challenge is to ...
The problem we spent a semester working on was building a remote controlled glider which used morphi...
This is an overview of our project to design an expandable brush. This brush is designed to be versa...
The automated syringe filling system is a bench-top device designed to remove human error when filli...
Lightweight Innovations for Tomorrow (LIFT) is a consortium with several industries, universities an...
In this Final Design Review, the team outlines the general scope of the ARES Cleaning System project...
This report is intended to outline all relevant background information, decisions, and design direct...
The design-to-prototype process for a One Knee Stair Negotiator, designed to reduce or eliminate the...
The objective of this project was to design, build, and test a rotating binding-to-snowboard interfa...
The Final Design Review (FDR) reports on the senior design project undertaken by a mechanical engine...
In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable l...
Local scour is a major cause of concern for the stability of bridge piers and the safety of the publ...
This final design review includes an overview of our project and the steps we have taken to create o...
Master of ScienceDepartment of Computing and Information SciencesWilliam H. HsuClustering in data mi...
In this thesis, an autonomous driving robot has been proposed and built based on a two-wheel Segway ...