A technological method of thin film silicon growth with an unconventional structure control has been uncovered. It involves a concurrence of metal-induced crystallization with direct growth of crystalline silicon at temperatures of ca. 575°C. Thermally evaporated 5-100 nm thick Ni films were used as prelayers for magnetron sputtered Si films. The thickness of a Ni prelayer was established to significantly alter the silicon film growth, providing a large-grain columnar structure when occurring in the 25-30 nm range, and diminishing the Si grain size toward corresponding lower and higher values of the Ni thickness. The phenomenon is attributed to the silicide nucleation processes at the Ni-Si interface. A decrease in the kinetic energy of the...
Ultrathin films of nickel deposited onto (100) Si substrates were found to form kinetically constrai...
cited By 0International audienceThe nucleation and lateral growth are more and more important steps ...
This is the first report of a technique for inserting a thin Zr interlayer into a nickel film to imp...
Direct current (d.c.) magnetron sputtering was applied to polycrystalline Si growth and yielded a un...
The present study addresses the mechanism of metal-induced growth of device-quality silicon thin fil...
Polycrystalline silicon thin films grown on a Ni prelayer by the metal-induced growth (MIG) techniqu...
A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent ...
Polycrystalline silicon thin films with a thickness of 0.5-2μm were grown on 25nm thick Ni prelayers...
A new technological method of producing the Ni silicide with metal-like conductivity by deposition o...
© 2018 Author(s). The electrical contact of the source and drain regions in state-of-the-art CMOS tr...
The metal–silicon thin-film system is not isostructural and furthermore exhibits pronounced interdif...
The growth kinetics of NiSi has been evaluated by depositing a Ni film on and Si substrates. X-ray...
The influence of Ni thickness on the formation of Nickel silicides was systematically investigated b...
The growth of the poly-Si films was studied by Transmission Electron Microscopy (TEM) after Ni Metal...
Ni(10 at.% Pt) monosilicide is used as contact in microelectronics but suffers from degradation at r...
Ultrathin films of nickel deposited onto (100) Si substrates were found to form kinetically constrai...
cited By 0International audienceThe nucleation and lateral growth are more and more important steps ...
This is the first report of a technique for inserting a thin Zr interlayer into a nickel film to imp...
Direct current (d.c.) magnetron sputtering was applied to polycrystalline Si growth and yielded a un...
The present study addresses the mechanism of metal-induced growth of device-quality silicon thin fil...
Polycrystalline silicon thin films grown on a Ni prelayer by the metal-induced growth (MIG) techniqu...
A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent ...
Polycrystalline silicon thin films with a thickness of 0.5-2μm were grown on 25nm thick Ni prelayers...
A new technological method of producing the Ni silicide with metal-like conductivity by deposition o...
© 2018 Author(s). The electrical contact of the source and drain regions in state-of-the-art CMOS tr...
The metal–silicon thin-film system is not isostructural and furthermore exhibits pronounced interdif...
The growth kinetics of NiSi has been evaluated by depositing a Ni film on and Si substrates. X-ray...
The influence of Ni thickness on the formation of Nickel silicides was systematically investigated b...
The growth of the poly-Si films was studied by Transmission Electron Microscopy (TEM) after Ni Metal...
Ni(10 at.% Pt) monosilicide is used as contact in microelectronics but suffers from degradation at r...
Ultrathin films of nickel deposited onto (100) Si substrates were found to form kinetically constrai...
cited By 0International audienceThe nucleation and lateral growth are more and more important steps ...
This is the first report of a technique for inserting a thin Zr interlayer into a nickel film to imp...