Add to ORKGContinuously variable transmissions (CVT\u27s) have been an alternative to traditional transmissions for internal combustion gas or diesel engines. They allow for an infinite number of gear ratios for better fuel economy and performance. One drawback to the CVT is that the belt between the two pulleys often wears or fails prematurely causing the entire CVT to need to be replaced. An alternative method for creating infinite gear ratios within a certain range without the need for a belt is the main objective of this project. The goal of the alternative design is to provide a concept that proves a CVT is possible without a belt. It will also improve the long term reliability of the CVT as the belt is the main cause of premature failure
Incorporating each aspect of engineering incorporated into a senior project is difficult. That is wh...
In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable l...
The purpose of this report is to document the need, objectives, marketing and engineering requiremen...
This project focuses on the design and modeling of a two degree-of-freedom dissipative passive hapti...
The issue that this project is concerned with is how to design and build a drivetrain, steering and ...
Dr. Xing and Professor Refvem are working to research and develop a quadruped robot that is capable ...
The transistor was widely employed in integrated circuit design. Nevertheless, the continued scaling...
Rotary-impact screw driver which is categorized as hand-held cordless power tool raised the opportu...
This research highlights the development of test platform of FPGA interconnect to capture marginal o...
Many of those with mobility limitations who are told they will need a wheelchair for the rest of the...
In this thesis, an autonomous driving robot has been proposed and built based on a two-wheel Segway ...
The demand on memory bandwidth has been increasing due to the rapid development in graphics intensiv...
Disc golf companies need better methods to test disc flight. The scope of this project is to create ...
The automated syringe filling system is a bench-top device designed to remove human error when filli...
Phase change materials (PCM) have many applications in transient cooling systems, including those wi...
Incorporating each aspect of engineering incorporated into a senior project is difficult. That is wh...
In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable l...
The purpose of this report is to document the need, objectives, marketing and engineering requiremen...
This project focuses on the design and modeling of a two degree-of-freedom dissipative passive hapti...
The issue that this project is concerned with is how to design and build a drivetrain, steering and ...
Dr. Xing and Professor Refvem are working to research and develop a quadruped robot that is capable ...
The transistor was widely employed in integrated circuit design. Nevertheless, the continued scaling...
Rotary-impact screw driver which is categorized as hand-held cordless power tool raised the opportu...
This research highlights the development of test platform of FPGA interconnect to capture marginal o...
Many of those with mobility limitations who are told they will need a wheelchair for the rest of the...
In this thesis, an autonomous driving robot has been proposed and built based on a two-wheel Segway ...
The demand on memory bandwidth has been increasing due to the rapid development in graphics intensiv...
Disc golf companies need better methods to test disc flight. The scope of this project is to create ...
The automated syringe filling system is a bench-top device designed to remove human error when filli...
Phase change materials (PCM) have many applications in transient cooling systems, including those wi...
Incorporating each aspect of engineering incorporated into a senior project is difficult. That is wh...
In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable l...
The purpose of this report is to document the need, objectives, marketing and engineering requiremen...