Three oxidation processes were employed to study the effects of chlorine on growth rate and device characteristics of capacitors. Oxide was grown without the use of TCA, with TCA prior to growth, and TCA during growth. An increased growth rate of the oxide, 450 angstroms in 42 minutes with TCA, as opposed to 50 minutes without TCA, was observed. Contrary to what was expected, the TCA processed oxides larger flatband shifts than the standard oxide growth wafers
Size restrictions will limit the ability of incinerators and hazardous waste landfills to process th...
The purpose of this study was to assess dermal and inhalation exposure to propiconazole among farmer...
Dyed and undyed AZ1512 series resists were characterized for exposure latitude, development rate, an...
A study has been performed to investigate oxynitrides as thin gate dielectrics. The method of nitrid...
This project dealt with the design and installation of a TCA bubbler system. Considerations for safe...
The formation and decay of trihalomethanes (THMs) and haloacetic acids(HAAs) were evaluated in a ful...
Conductive tin oxide films were deposited through reactive sputtering on glass substrates under diff...
The environmental contaminant cyclopenta[cd]pyrene (CPP) is a potent genotoxic carcinogen. Once inha...
As transistors have decreased in size and increased in packing density, a need has arisen for an alt...
The Tegal 700 plasma etcher was used to etch trenches into four micron deep p-type diffused resistor...
An empirical-conceptual modeling approach was developed by Carlton for estimating worker exposure to...
A study has been performed to determine the viability of phosphoric acid as a high-index fluid for i...
Hot electron injection was investigated using the HP 4145B SPA to induce Fewler- Nordheim tunneling....
A dry etch S1O2 process was optimized using the Plasmatrac 2406 RIE etcher at RIT, while maintaining...
Resolution capability of a GCA Mann 4800 DSW Stepper was improved using a bilayer photoresist scheme...
Size restrictions will limit the ability of incinerators and hazardous waste landfills to process th...
The purpose of this study was to assess dermal and inhalation exposure to propiconazole among farmer...
Dyed and undyed AZ1512 series resists were characterized for exposure latitude, development rate, an...
A study has been performed to investigate oxynitrides as thin gate dielectrics. The method of nitrid...
This project dealt with the design and installation of a TCA bubbler system. Considerations for safe...
The formation and decay of trihalomethanes (THMs) and haloacetic acids(HAAs) were evaluated in a ful...
Conductive tin oxide films were deposited through reactive sputtering on glass substrates under diff...
The environmental contaminant cyclopenta[cd]pyrene (CPP) is a potent genotoxic carcinogen. Once inha...
As transistors have decreased in size and increased in packing density, a need has arisen for an alt...
The Tegal 700 plasma etcher was used to etch trenches into four micron deep p-type diffused resistor...
An empirical-conceptual modeling approach was developed by Carlton for estimating worker exposure to...
A study has been performed to determine the viability of phosphoric acid as a high-index fluid for i...
Hot electron injection was investigated using the HP 4145B SPA to induce Fewler- Nordheim tunneling....
A dry etch S1O2 process was optimized using the Plasmatrac 2406 RIE etcher at RIT, while maintaining...
Resolution capability of a GCA Mann 4800 DSW Stepper was improved using a bilayer photoresist scheme...
Size restrictions will limit the ability of incinerators and hazardous waste landfills to process th...
The purpose of this study was to assess dermal and inhalation exposure to propiconazole among farmer...
Dyed and undyed AZ1512 series resists were characterized for exposure latitude, development rate, an...