This paper, from Alireza Saberkari and Alireza Saberkari of the Department of Electrical Engineering at the Iran University of Science and Technology, covers 2.4 GHz High Performance CMOS SubHarmonic Mixers. An overview of the proposed mixer structure is given, as well as simulation results, and a conclusion.Â
In this paper a comparison between a fourth harmonic mixer and a combined doubler/subharmonic mixer ...
[[abstract]]In this paper, a sub-harmonic direct-conversion Gilbert-cell mixer using 0.13-frac14m CM...
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...
This paper, from Alireza Saberkari and Alireza Saberkari of the Department of Electrical Engineer...
The task of this master’s thesis is design and implementation subharmonic mixer for the microwave ba...
This thesis presents a novel Subharmonic Double Balanced Mixer topology suitable for implementation ...
This paper presents the design of terahertz 2× and 4× sub-harmonic down-mixers using Schottky Barrie...
[[abstract]]This letter presents a 30-100 GHz wideband and compact fully integrated sub-harmonic Gil...
A new passive subharmonic mixer topology is presented and compared to a previously published passive...
In this paper, a high-performance 0.34 THz sub-harmonic mixer combining two-stage reduced matching t...
This paper demonstrates a wideband, subharmonic down converting mixer using a commercial 130-nm SiGe...
This paper demonstrates a wideband, subharmonic down converting mixer using a commercial 130-nm SiGe...
The basic concept of the transverse Schottky diode is discussed. Device simulations are presented fo...
[[abstract]]A V-band sub-harmonic mixer with an integrated frequency doubler and a 180 degrees out-o...
This letter reports a 4× W-band quasi-subharmonic down-conversion mixer in a 65 nm CMOS technology. ...
In this paper a comparison between a fourth harmonic mixer and a combined doubler/subharmonic mixer ...
[[abstract]]In this paper, a sub-harmonic direct-conversion Gilbert-cell mixer using 0.13-frac14m CM...
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...
This paper, from Alireza Saberkari and Alireza Saberkari of the Department of Electrical Engineer...
The task of this master’s thesis is design and implementation subharmonic mixer for the microwave ba...
This thesis presents a novel Subharmonic Double Balanced Mixer topology suitable for implementation ...
This paper presents the design of terahertz 2× and 4× sub-harmonic down-mixers using Schottky Barrie...
[[abstract]]This letter presents a 30-100 GHz wideband and compact fully integrated sub-harmonic Gil...
A new passive subharmonic mixer topology is presented and compared to a previously published passive...
In this paper, a high-performance 0.34 THz sub-harmonic mixer combining two-stage reduced matching t...
This paper demonstrates a wideband, subharmonic down converting mixer using a commercial 130-nm SiGe...
This paper demonstrates a wideband, subharmonic down converting mixer using a commercial 130-nm SiGe...
The basic concept of the transverse Schottky diode is discussed. Device simulations are presented fo...
[[abstract]]A V-band sub-harmonic mixer with an integrated frequency doubler and a 180 degrees out-o...
This letter reports a 4× W-band quasi-subharmonic down-conversion mixer in a 65 nm CMOS technology. ...
In this paper a comparison between a fourth harmonic mixer and a combined doubler/subharmonic mixer ...
[[abstract]]In this paper, a sub-harmonic direct-conversion Gilbert-cell mixer using 0.13-frac14m CM...
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...