Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. Hydration tests were carried out to determine the inhibitory index in order to characterise wood-cement compatibility. The results revealed that the mixture of hornbeam -cement can be classified as moderate inhibition. Two wood: cement ratios were applied in this study, namely 1:3 and 1:4, for the board manufacture. It was found that an increase of cement-wood ratio resulted to an increase in all, but MOR values. All properties of the boards made from 1:4 wood: cement ratio, surpassed the minimum requirements set forth by the building type HZ code. Boards were exposed to brown and white rot fungi, Coniophora puteana, Trametes versicolor respec...
In this study, a series of treatments were considered to determine the impact of such treatments on ...
In this study, the effect of type II and III Portland cement and the use of undepithed and depithed ...
The effects of initial particle moisture content, wood-cement ratio and density on physical (thickne...
Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. H...
Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. H...
Hydration tests were carried out to determine the inhibitory index in order to characterise wood-cem...
It is known that there is a correlation between hydration heat and physico-mechanical properties of ...
The aim of this research was to investigate the physico-mechanical, thermal, and morphological prope...
This study investigated the properties of cement-bonded particleboards made with mountain pine beetl...
The quality of the cement board depends on the compatibility between cement and particles from ligno...
2.6 hours) was recorded as the most compatible species for manufacturing cement bio-based c...
This study examined the influence of decreasing cement/wood ratios from 3.0 to 1.5 at 0.5 increments...
The study was design to evaluate the physical and mechanical properties of cement-bonded particleboa...
Wood-wool cement boards (WWCBs) are manufactured in many tropical countries which have extensive euc...
Wood-wool cement boards (WWCB) are a type of cement/fibre composite using wood strands as reinforcem...
In this study, a series of treatments were considered to determine the impact of such treatments on ...
In this study, the effect of type II and III Portland cement and the use of undepithed and depithed ...
The effects of initial particle moisture content, wood-cement ratio and density on physical (thickne...
Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. H...
Cement bonded particleboards were manufactured from hornbeam (Carpinus betulus L.) wood particles. H...
Hydration tests were carried out to determine the inhibitory index in order to characterise wood-cem...
It is known that there is a correlation between hydration heat and physico-mechanical properties of ...
The aim of this research was to investigate the physico-mechanical, thermal, and morphological prope...
This study investigated the properties of cement-bonded particleboards made with mountain pine beetl...
The quality of the cement board depends on the compatibility between cement and particles from ligno...
2.6 hours) was recorded as the most compatible species for manufacturing cement bio-based c...
This study examined the influence of decreasing cement/wood ratios from 3.0 to 1.5 at 0.5 increments...
The study was design to evaluate the physical and mechanical properties of cement-bonded particleboa...
Wood-wool cement boards (WWCBs) are manufactured in many tropical countries which have extensive euc...
Wood-wool cement boards (WWCB) are a type of cement/fibre composite using wood strands as reinforcem...
In this study, a series of treatments were considered to determine the impact of such treatments on ...
In this study, the effect of type II and III Portland cement and the use of undepithed and depithed ...
The effects of initial particle moisture content, wood-cement ratio and density on physical (thickne...