Add to ORKGThis past year, research work was done on the oxidation of lubricating oils. Since this is the first year that this research project has been carried out, our work was mainly directed towards finding ways of attacking the study of the oxidation of lubricating oils. We have found a few paths which warrant further investigations
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.Cata...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1995.Includ...
During the running motor oil quality determination oil makeup has a big influence on thermal oxidati...
Lubricants in use today are normally prepared from refined mineral oil fractions, and in service tho...
The purpose of this thesis is to give a brief study of American lubricating oils, to show the motore...
Although the readiness with which petroleum oils oxidize when exposed. to heat and air is well-known...
In recent years, increased requirements for protective properties have been imposed on petroleum oil...
Graduation date: 1952In the mid 1930's the Diesel engine, which formerly was used only as a large, l...
This essay reviews the elements that would make a lubricating oil effective in preventing wear on an...
During normal operation, oxidation products gradually foul lubricating oil and external contaminants...
Approximately a half of all consumed lubricants, in one or another way, end up in the environment. S...
Investigations into lubricating oil degradation and engine wear were carried out during the course ...
Approximately a half of all consumed lubricants, in one or another way, end up in the environment. S...
An industrial base oil, a blend of different paraffin fractions, is heated to 130 degrees C (1) in t...
Simulating the operating condition of aviation engine via autoclave experiment of high temperature a...
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.Cata...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1995.Includ...
During the running motor oil quality determination oil makeup has a big influence on thermal oxidati...
Lubricants in use today are normally prepared from refined mineral oil fractions, and in service tho...
The purpose of this thesis is to give a brief study of American lubricating oils, to show the motore...
Although the readiness with which petroleum oils oxidize when exposed. to heat and air is well-known...
In recent years, increased requirements for protective properties have been imposed on petroleum oil...
Graduation date: 1952In the mid 1930's the Diesel engine, which formerly was used only as a large, l...
This essay reviews the elements that would make a lubricating oil effective in preventing wear on an...
During normal operation, oxidation products gradually foul lubricating oil and external contaminants...
Approximately a half of all consumed lubricants, in one or another way, end up in the environment. S...
Investigations into lubricating oil degradation and engine wear were carried out during the course ...
Approximately a half of all consumed lubricants, in one or another way, end up in the environment. S...
An industrial base oil, a blend of different paraffin fractions, is heated to 130 degrees C (1) in t...
Simulating the operating condition of aviation engine via autoclave experiment of high temperature a...
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.Cata...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1995.Includ...
During the running motor oil quality determination oil makeup has a big influence on thermal oxidati...