Add to ORKGThe paper is devoted to the strut-and-tie method (STM) which is used for analysis and design of reinforced concrete structures. The most important and valuable information about the STM has been gathered and the example that applies to the method has been presented
The strut-and-tie method (STM) is a powerful tool used for the design of D-regions (disturbed region...
The introduction of strut-and-tie models in fib Model Code 1990 as a design basis for discontinuity ...
2017Barrington, MeloniePDFTech ReportFHWA-NHI-17-071DTFH61-11-D-00046/5011Concrete structuresStrut a...
Strut-and-tie model (STM), with its truss analogy, is yet a powerful tool for analyzing and designin...
An interactive computer graphics program implementing the Strut-Tie model approach for analysis and ...
This thesis focused on the applicability of truss models and the strut-and-tie method to the analysi...
This research is part of an on-going research programme on deep beams at Nanyang Technological Unive...
The performance and strength of five simply supported reinforced concrete beams with different stirr...
The strut-and-tie method (STM) is used for the design of D-regions (disturbed regions) of reinforced...
U disertaciji su analizirani armiranobetonski ravanski nosači primenom metode pritisnutih štapova i ...
The strut-and-tie method (STM) is a simple and conservative method for designing concrete structures...
U radu je predstavljen prijedlog za određivanje Strut-and-Tie modela armiranobetonskih ravninskih no...
AbstractThe ordinary beams theory based on Bernoulli's theorem is not applicable to non linear and n...
Within the field of Reinforced Concrete (RC) structures and more specifically, at the design of non-...
Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as th...
The strut-and-tie method (STM) is a powerful tool used for the design of D-regions (disturbed region...
The introduction of strut-and-tie models in fib Model Code 1990 as a design basis for discontinuity ...
2017Barrington, MeloniePDFTech ReportFHWA-NHI-17-071DTFH61-11-D-00046/5011Concrete structuresStrut a...
Strut-and-tie model (STM), with its truss analogy, is yet a powerful tool for analyzing and designin...
An interactive computer graphics program implementing the Strut-Tie model approach for analysis and ...
This thesis focused on the applicability of truss models and the strut-and-tie method to the analysi...
This research is part of an on-going research programme on deep beams at Nanyang Technological Unive...
The performance and strength of five simply supported reinforced concrete beams with different stirr...
The strut-and-tie method (STM) is used for the design of D-regions (disturbed regions) of reinforced...
U disertaciji su analizirani armiranobetonski ravanski nosači primenom metode pritisnutih štapova i ...
The strut-and-tie method (STM) is a simple and conservative method for designing concrete structures...
U radu je predstavljen prijedlog za određivanje Strut-and-Tie modela armiranobetonskih ravninskih no...
AbstractThe ordinary beams theory based on Bernoulli's theorem is not applicable to non linear and n...
Within the field of Reinforced Concrete (RC) structures and more specifically, at the design of non-...
Strut-and-Tie Models (STM) for the design of concrete beams, comprising of struts, ties, nodes as th...
The strut-and-tie method (STM) is a powerful tool used for the design of D-regions (disturbed region...
The introduction of strut-and-tie models in fib Model Code 1990 as a design basis for discontinuity ...
2017Barrington, MeloniePDFTech ReportFHWA-NHI-17-071DTFH61-11-D-00046/5011Concrete structuresStrut a...