Ferrous tungsten (Fe-W) electrodeposited thin film properties have been studied for different current densities and different deposition times. The magnetic saturation (Ms), retentivity (Mr) and coercivity (Hc) of the films have been studied using vibrating sample magnetometer. The retentivity (Mr) and the magnetic saturation (Ms) of the deposited films increased with the increase of current density. The crystallite size and stress of the deposited thin films were calculated using X-ray diffraction (XRD) studies. Percentage of elemental analysis of Fe-W films has been obtained using energy dispersive X-ray analysis (EDAX). Surface morphology analysis has been carried out using scanning electron microscope (SEM). The magnetic properties and ...
A detailed study has been carried out to investigate the effect of applied current density on the co...
Due to the presence of tungsten, Fe-W alloys can be applied as anticorrosive coatings. However, the ...
The electrodeposition of Fe–Co–W alloys was examined using a rotating cylinder Hull (RCH) cell and c...
395-398Ferrous tungsten (Fe-W) electrodeposited thin film properties have been studied for differen...
Thin films of Co-W, 300-500 Å thick, were electrodeposited at various compositions under a wide rang...
Abstract: Electro deposition of NiFeWS thin films was carried out from Tri Potassium citrate bath at...
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The infl...
Electrodeposition of Fe-W coatings has been carried out from an environmentally friendly Fe(III)-bas...
A detailed study has been carried out to investigate the effect of applied current density on the co...
We investigated the metal ion concentration effects on film composition of Fe-W alloy plating and tu...
Nickel-tungsten (Ni-W) alloys with tailored composition were electrodeposited by controlling the pH ...
Ternary Iron Group (IG), Rare Earth (RE) alloys were codeposited from aqueous chloride solution with...
The metallic coatings have their importance in the protection of structures against corrosion, gaini...
Lately the interest in tungsten and iron group metal (Me-W) alloys has grown because of enhanced ele...
Fe–W alloys containing ~23–30 at.% tungsten were electrodeposited from citrate–ammonia solutions at ...
A detailed study has been carried out to investigate the effect of applied current density on the co...
Due to the presence of tungsten, Fe-W alloys can be applied as anticorrosive coatings. However, the ...
The electrodeposition of Fe–Co–W alloys was examined using a rotating cylinder Hull (RCH) cell and c...
395-398Ferrous tungsten (Fe-W) electrodeposited thin film properties have been studied for differen...
Thin films of Co-W, 300-500 Å thick, were electrodeposited at various compositions under a wide rang...
Abstract: Electro deposition of NiFeWS thin films was carried out from Tri Potassium citrate bath at...
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The infl...
Electrodeposition of Fe-W coatings has been carried out from an environmentally friendly Fe(III)-bas...
A detailed study has been carried out to investigate the effect of applied current density on the co...
We investigated the metal ion concentration effects on film composition of Fe-W alloy plating and tu...
Nickel-tungsten (Ni-W) alloys with tailored composition were electrodeposited by controlling the pH ...
Ternary Iron Group (IG), Rare Earth (RE) alloys were codeposited from aqueous chloride solution with...
The metallic coatings have their importance in the protection of structures against corrosion, gaini...
Lately the interest in tungsten and iron group metal (Me-W) alloys has grown because of enhanced ele...
Fe–W alloys containing ~23–30 at.% tungsten were electrodeposited from citrate–ammonia solutions at ...
A detailed study has been carried out to investigate the effect of applied current density on the co...
Due to the presence of tungsten, Fe-W alloys can be applied as anticorrosive coatings. However, the ...
The electrodeposition of Fe–Co–W alloys was examined using a rotating cylinder Hull (RCH) cell and c...