Simplified Method for Spatial Evaluation of Liquefaction Potential in the St. Louis Area

As a part of an earthquake hazard mapping program being undertaken by the U.S. Geological Survey in the St. Louis metropolitan area, surficial geologic mapping and subsurface geotechnical data have been compiled into a three-dimensional geographic information system (GIS). The potential for soil liquefaction was then spatially evaluated by using subsurface information from 562 boreholes for an assumed M7.5 earthquake emanating from the New Madrid Seismic Zone. Geotechnical data (standard penetration test N-values, overburden pressure, and depth-to-groundwater) and the scenario peak ground accelerations (PGA=0.1, 0.20, and 0.30 g) were applied to evaluate the factor of safety (FS) against earthquake-induced liquefaction. The liquefaction potential index (LPI) method was used in these evaluations because it allows for calculations of FS with depth for 10-25 discrete stratigraphic horizons overlying the bedrock across the St. Louis metropolitan area. LPI values were derived from the correlation between calculated LPI values and the depths-to-groundwater within late Quaternary stratigraphic units. The St. Louis metropolitan area was then classed according to four levels of severity of risk from liquefaction: (1) no liquefaction potential, (2) little-to-no likelihood, (3) moderate, and (4) severe