Steel sheet sheathing options for cold-formed steel framed shear wall assemblies providing shear resistance - phase 2

Monotonic and cyclic tests on cold-formed steel shear walls sheathed with steel sheets on one side were conducted to (1) verify the published nominal shear strength for 18-mil and 27-mil steel sheets; and (2) investigate the behavior of 6-ft. wide shear walls with multiple steel sheets. This project is the continuation of a completed project titled “Steel Sheet Sheathing Options for Cold-Formed Steel Framed Shear Wall Assemblies Providing Shear Resistance” by Yu (2007). This Phase 2 project confirms the discrepancy in the published nominal strength of 27-mil sheets discovered by the Phase 1 project, and proposes new values. The project also finds disagreement on the nominal strength of 18-mil sheets for seismic design, which requires further research. For the 6-ft. wide shear walls, this project indentifies special seismic detailing to prevent potential damage on studs while improving the strength and ductility of the shear walls. This report provides detailed information on the test setup, test results, and analyses