Add to ORKGThe original object of this work was to determine the relation between the quantities of oxide and sulphate formed in roasting a sulphide under known conditions of temperature, time and supply of air. But difficulties arose in constructing apparatus, which in the short time allotted could not be overcome. These are mentioned in description of apparatus, and were of such a nature that the relations between products and conditions are for the most part qualitative --page 1
The vapour pressures of some inorganic sulphates at high temperatures were determined by the combine...
The relation between concentration of sulfur dioxide in flue gas and sulfur content of iron ore was ...
Thermodynamic analysis of a non-polluting process for the effective treatment of lean multimetallic ...
ROASTING of sulphidic minerals is one of the very important steps in the extraction metallurgi...
Spontaneous or self-heating of sulphides can occur under certain conditions of moisture, temperature...
Some sulphides have a propensity to self-heat that under certain conditions can lead to hazardous en...
Roasting of metallic sulfides have been studies by a large number of investigators in recent years. ...
The unprecedented demand for sulphuric acid of the higher strengths (98% and higher) in the manufact...
Work upon the oxidation of natural sulphides done at this laboratory indicates that laboratory metho...
This work deals with the effect which different temperatures and different percentages of CO₂ and SO...
For recovery of elemental sulphur and iron oxide suitable for pig iron production, the reaction [num...
Experiments were performed on the roasting of zinc sulfide in the temperature range 450 to 750℃ in t...
M.Tech.The most commonly used route in the hydrometallurgical extraction of zinc and copper is the r...
Accurate information is lacking as to the effect of temperature and time of distillation on the rela...
Some materials when exposed to the atmosphere can exhibit a rise in temperature without requiring an...
The vapour pressures of some inorganic sulphates at high temperatures were determined by the combine...
The relation between concentration of sulfur dioxide in flue gas and sulfur content of iron ore was ...
Thermodynamic analysis of a non-polluting process for the effective treatment of lean multimetallic ...
ROASTING of sulphidic minerals is one of the very important steps in the extraction metallurgi...
Spontaneous or self-heating of sulphides can occur under certain conditions of moisture, temperature...
Some sulphides have a propensity to self-heat that under certain conditions can lead to hazardous en...
Roasting of metallic sulfides have been studies by a large number of investigators in recent years. ...
The unprecedented demand for sulphuric acid of the higher strengths (98% and higher) in the manufact...
Work upon the oxidation of natural sulphides done at this laboratory indicates that laboratory metho...
This work deals with the effect which different temperatures and different percentages of CO₂ and SO...
For recovery of elemental sulphur and iron oxide suitable for pig iron production, the reaction [num...
Experiments were performed on the roasting of zinc sulfide in the temperature range 450 to 750℃ in t...
M.Tech.The most commonly used route in the hydrometallurgical extraction of zinc and copper is the r...
Accurate information is lacking as to the effect of temperature and time of distillation on the rela...
Some materials when exposed to the atmosphere can exhibit a rise in temperature without requiring an...
The vapour pressures of some inorganic sulphates at high temperatures were determined by the combine...
The relation between concentration of sulfur dioxide in flue gas and sulfur content of iron ore was ...
Thermodynamic analysis of a non-polluting process for the effective treatment of lean multimetallic ...