Add to ORKGTheoretically dense PLZT specimens with average grain diameters were fabricated by a pressure-sintering technique. Specimens were characterized with respect to their electrical and electromechanical properties
This study is concerned with the evaluation of a variety of production and inventory decision rules ...
This is a theoretical and experimental study of ways to use context for automatic interpretation of ...
Two engineering plastics, an acrylonitrile-butadiene-styrene resin and a rigid polyvinyl chloride re...
A study was conducted on surface morphology, crystal structure, and surface chemistry of high slumin...
The plane strain fracture toughness, KIc, was measured for H-11 steel using compact tension specimen...
The use of multiple spindle, numerically controlled, drilling machines, notably in printed wiring bo...
A new algorithm was proposed that will compute the number of times each piece of input data is made ...
Eight compositions of copper-tungsten composites, eight compositions of silver-tungsten composites, ...
A study of the short time compressive creep behavior of WC-Co alloys in the range 900-1000 C and 50-...
Three types of test specimens have been used to study the effect of specimen geometry on both fractu...
The use of three-sigma limits with Shewhart charts became a dogma and it would be unfortunate if a s...
In inventory systems that assume steady state operations, problems arise when real changes in the de...
An ultrasonic bonder, modified to include heating in the bonding cycle, was used to produce contact ...
The electrodeposited system nickel-phosphorus up to 15w/o P is examined for magnetic behavior as inf...
This thesis is concerned with the development of an optical method, and the design of the appropriat...
This study is concerned with the evaluation of a variety of production and inventory decision rules ...
This is a theoretical and experimental study of ways to use context for automatic interpretation of ...
Two engineering plastics, an acrylonitrile-butadiene-styrene resin and a rigid polyvinyl chloride re...
A study was conducted on surface morphology, crystal structure, and surface chemistry of high slumin...
The plane strain fracture toughness, KIc, was measured for H-11 steel using compact tension specimen...
The use of multiple spindle, numerically controlled, drilling machines, notably in printed wiring bo...
A new algorithm was proposed that will compute the number of times each piece of input data is made ...
Eight compositions of copper-tungsten composites, eight compositions of silver-tungsten composites, ...
A study of the short time compressive creep behavior of WC-Co alloys in the range 900-1000 C and 50-...
Three types of test specimens have been used to study the effect of specimen geometry on both fractu...
The use of three-sigma limits with Shewhart charts became a dogma and it would be unfortunate if a s...
In inventory systems that assume steady state operations, problems arise when real changes in the de...
An ultrasonic bonder, modified to include heating in the bonding cycle, was used to produce contact ...
The electrodeposited system nickel-phosphorus up to 15w/o P is examined for magnetic behavior as inf...
This thesis is concerned with the development of an optical method, and the design of the appropriat...
This study is concerned with the evaluation of a variety of production and inventory decision rules ...
This is a theoretical and experimental study of ways to use context for automatic interpretation of ...
Two engineering plastics, an acrylonitrile-butadiene-styrene resin and a rigid polyvinyl chloride re...