Add to ORKGThe effect of temperature on tool wear in cutting metal with a carbide tool - with three distinct type coolants, ambient air, flow coolant, and spray mist - is the subject of this investigation
A study was conducted on surface morphology, crystal structure, and surface chemistry of high slumin...
The influence of welding conditions on the geometry of single pass welds and the re-crystallized zon...
Recent efforts towards a better understanding of the behavior of thin metallic films have been stimu...
The purpose of this work was to determine the rate of growth of the inhibiting aluminum-rich alloy l...
Three types of test specimens have been used to study the effect of specimen geometry on both fractu...
The effects of nitrogen on the properties of anodic oxides formed on tantalum thin films reactively ...
This thesis evaluates the effect of forced air, free flow and spray mist application of cutting flui...
The purpose of this investigation was to develop a practical apparatus for continuous electrophoresi...
The aim of this thesis is to present a solution of the problem of thermal stresses in a finite hollo...
An ultrasonic bonder, modified to include heating in the bonding cycle, was used to produce contact ...
Two engineering plastics, an acrylonitrile-butadiene-styrene resin and a rigid polyvinyl chloride re...
The adhesion of high purity gold to single crystal alumina has been investigated by use of the sessi...
Thin films circuits which require inductive elements are more expensive to fabricate because of addi...
A cryogenic refrigerator using an expander with a reciprocating displacer or piston which has a ther...
Interest in the ferroelectric properties of ceramic materials in the solid solution system lead zirc...
A study was conducted on surface morphology, crystal structure, and surface chemistry of high slumin...
The influence of welding conditions on the geometry of single pass welds and the re-crystallized zon...
Recent efforts towards a better understanding of the behavior of thin metallic films have been stimu...
The purpose of this work was to determine the rate of growth of the inhibiting aluminum-rich alloy l...
Three types of test specimens have been used to study the effect of specimen geometry on both fractu...
The effects of nitrogen on the properties of anodic oxides formed on tantalum thin films reactively ...
This thesis evaluates the effect of forced air, free flow and spray mist application of cutting flui...
The purpose of this investigation was to develop a practical apparatus for continuous electrophoresi...
The aim of this thesis is to present a solution of the problem of thermal stresses in a finite hollo...
An ultrasonic bonder, modified to include heating in the bonding cycle, was used to produce contact ...
Two engineering plastics, an acrylonitrile-butadiene-styrene resin and a rigid polyvinyl chloride re...
The adhesion of high purity gold to single crystal alumina has been investigated by use of the sessi...
Thin films circuits which require inductive elements are more expensive to fabricate because of addi...
A cryogenic refrigerator using an expander with a reciprocating displacer or piston which has a ther...
Interest in the ferroelectric properties of ceramic materials in the solid solution system lead zirc...
A study was conducted on surface morphology, crystal structure, and surface chemistry of high slumin...
The influence of welding conditions on the geometry of single pass welds and the re-crystallized zon...
Recent efforts towards a better understanding of the behavior of thin metallic films have been stimu...