Add to ORKGThe critical current density of Bi-Sr-Ca-Cu-O superconductors of 1112 nominal composition can be improved appreciably by giving them a flash heat treatment at 1050°C for 5 minutes followed by sintering at 860°C for 18 hours. The results of XRD, TEM, magnetic susceptibility and four probe electrical measurements indicate that the grain boundary weak links are improved by this flash treatment
The development of pure phase 123 and Bi-based 2223 superconductors has been optimized. The pre-heat...
In the BiSrCaCuO (BSCCO) superconductors there has been considerable success in overcoming weak link...
In this paper, the possibility of critical temperature increasing of superconducting precursor Tс an...
Bismuth cuprate high temperature superconductors are currently the only ceramic material that can be...
The production of bulk Bi2+xSr3-yCayCu2O8+ ∆ (Bi-2212) superconductors for fault current limiter app...
The production of bulk Bi2+xSr3-yCa yCu 2O8+delta (Bi-2212) superconductors for fault current limite...
An alternative synthetic approach was attempted for the fabrication of the Bi-Ca-Sr-Cu oxide superco...
The spark plasma sintering (SPS) technique, by using a compacting pressure of 50 MPa, was used to co...
Enhancements in the transport current properties of long lengths of multifilament Ag-sheathed (Bi,Pb...
We study the combined influence of calcination and sintering temperature on the microstructure, supe...
Superconducting (2212) Bi-Sr-Ca-Cu-O (BSCCO) and BSCCO-Ag composites were explosively consolidated i...
Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x} (2212) and (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (...
[[abstract]]The reproducibility ofT c in superconductive Bi2Sr2CaCu2O8 is known to be very poor. In ...
The performance of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes...
Bi2.1Sr1.96Ca0.95Cu2.0O8 (Bi-2212) bulks have been obtained with Spark Plasma Sintering (SPS) method...
The development of pure phase 123 and Bi-based 2223 superconductors has been optimized. The pre-heat...
In the BiSrCaCuO (BSCCO) superconductors there has been considerable success in overcoming weak link...
In this paper, the possibility of critical temperature increasing of superconducting precursor Tс an...
Bismuth cuprate high temperature superconductors are currently the only ceramic material that can be...
The production of bulk Bi2+xSr3-yCayCu2O8+ ∆ (Bi-2212) superconductors for fault current limiter app...
The production of bulk Bi2+xSr3-yCa yCu 2O8+delta (Bi-2212) superconductors for fault current limite...
An alternative synthetic approach was attempted for the fabrication of the Bi-Ca-Sr-Cu oxide superco...
The spark plasma sintering (SPS) technique, by using a compacting pressure of 50 MPa, was used to co...
Enhancements in the transport current properties of long lengths of multifilament Ag-sheathed (Bi,Pb...
We study the combined influence of calcination and sintering temperature on the microstructure, supe...
Superconducting (2212) Bi-Sr-Ca-Cu-O (BSCCO) and BSCCO-Ag composites were explosively consolidated i...
Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub x} (2212) and (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (...
[[abstract]]The reproducibility ofT c in superconductive Bi2Sr2CaCu2O8 is known to be very poor. In ...
The performance of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes...
Bi2.1Sr1.96Ca0.95Cu2.0O8 (Bi-2212) bulks have been obtained with Spark Plasma Sintering (SPS) method...
The development of pure phase 123 and Bi-based 2223 superconductors has been optimized. The pre-heat...
In the BiSrCaCuO (BSCCO) superconductors there has been considerable success in overcoming weak link...
In this paper, the possibility of critical temperature increasing of superconducting precursor Tс an...