Oil-Based Mud Cutting as an Additional Raw Material in Clinker Production

Oil-Based Mud (OBM) cutting is a hazardous by-product generated during oil-well drilling. Its chemical composition suggests that it might be suitable as a raw material in cement manufacturing. It is rich in calcium oxide, silica, and aluminium oxide, which are the major oxides in raw materials for cement manufacturing. In this research, OBM cutting is used as a constituent of the raw meal for cement clinker production. Raw meal mixtures were prepared by mixing different ratios of raw materials increasing OBM content. The impact of the addition of OBM cutting on the resulting clinker has been investigated. The results demonstrate that OBM cutting could be recycled in the manufacturing of Portland cement clinker. Clinker prepared using OBM cutting had very similar properties to that prepared from limestone. This result could represent an opportunity for solving an environmental problem. The addition of OBM cutting lowers the calcination temperature, and increases the rate of carbonate dissociation. However, it also leads to a higher free lime in clinker, which is a result of the presence of trace elements, such as barium. Overall, its use as a raw material in cement production could provide a cost-effective, environment-friendly route for the management of OBM cutting