Design Flood Estimation : Exploring the Potentials and Limitations of Two Alternative Approaches

The design of flood defence structures requires the estimation of flood water levels corresponding to a given probability of exceedance, or return period. In river flood management, this estimation is often done by statistically analysing the frequency of flood discharge peaks. This typically requires three main steps. First, direct measurements of annual maximum water levels at a river cross-section are converted into annual maximum flows by using a rating curve. Second, a probability distribution function is fitted to these annual maximum flows to derive the design peak flow corresponding to a given return period. Third, the design peak flow is used as input to a hydraulic model to derive the corresponding design flood level. Each of these three steps is associated with significant uncertainty that affects the accuracy of estimated design flood levels. Here, we propose a simulation framework to compare this common approach (based on the frequency analysis of annual maximum flows) with an alternative approach based on the frequency analysis of annual maximum water levels. The rationale behind this study is that high water levels are directly measured, and they often come along with less uncertainty than river flows. While this alternative approach is common for storm surge and coastal flooding, the potential of this approach in the context of river flooding has not been sufficiently explored. Our framework is based on the generation of synthetic data to perform a numerical experiment and compare the accuracy and precision of estimated design flood levels based on either annual maximum river flows (common approach) or annual maximum water levels (alternative approach).Hydraulic Engineerin