Sensitivity analysis for in-cylinder soot-particle size imaging with laser-induced incandescence

International audienceSoot particle sizes can be determined from time-resolved laser-induced incandescence (LII) in point measurements where full signal traces are detected. For instantaneous imaging, strategies are required that must cope with time-gated information and that rely on assumptions on the local boundary conditions. A model-based analysis is performed to identify the dependence of LII particle-size imaging on the assumed boundary conditions such as bath gas temperature, pressure, particle heat-up temperature, accommodation coefficients, and soot morphology. Various laser-fluence regimes and gas pressures are considered. For 60 bar, fluences that lead to particle heat-up temperatures of 3400– 3900 K provided the lowest sensitivity on particle-sizing. Effects of laser attenuation are evaluated. A combination of one detection gate starting at the signal peak and the other starting with 5 ns delay was found to provide the highest sensitivity at 60 bar. The optimum gate delays for different pressures are shown. The effects of timing jitter and poly-dispersity are investigated. Systematic errors in pyrometry imaging at 60 bar is evaluated