Investigation of the thermal performance of natTe target for 124I production in the RARS cyclotron

Regarding the low thermal conductivity of natTe element, the provision of an effective cooling system is one of the critical issues in cyclotron targetry to prevent melting of target matter during the irradiation to 124I production via natTe(p,xn) 124I reaction. Heat transfer on Te target and efficiency of cooling fluid in the solid target system have been simulated based on a Finite Element Analysis (FEA) code for the thermal behavior of the target during the irradiation and under different beam currents, coolant flow rates, substrate matters and target geometry. The results on the routinely used solid target in Radiation Application Research School (RARS) cyclotron showed that in a 3 m/s coolant flow rate, by using a fined-cooling system and a nickel substrate coated on copper backing plate, the irradiation beam current can be raised up to 180 lA without any risk of melting. The cooling flow rates greater than 3 m/s do not noticeably improve the heat dispersion of target layer. As expected, a linear increase was observed for the temperature and temperature gradient of plates in the beam currents of 100 - 300 lA