Add to ORKGDensity, microstructure and microhardness have been investigated for samples, sintered from submicro-alpha-SiC and micro-SiC powders as well as their mixtures with addition of 50 vol.% alpha-Si3N4 nanopowder in the temperature interval 1500-2000 degrees C under pressure of 4 GPa. The dispersed silicon carbide submicron powder and the composite of submicro-SiC/nano-Si3N4 powder mixture have the most homogeneous microstructure and the higher hardness (respectively, up to 24 GPa and 22 GPa).International Conference on Physics, Chemistry and Applications of Nanostructures (NANOMEETING), May 28-31, 2013, Minsk, Byelaru
The microstructure and the mechanical properties of SiCN-nanocomposites fabricated from different po...
Microstructure of sintered nanocrystalline SiC is studied by x-ray line profile analysis and transmi...
The activities presented here, were initiated by the publications of Niihara and Ishizaki. There, th...
Density, microstructure and microhardness have been investigated for samples, sintered from submicro...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
Nanostructured ceramics offer significant improvements in properties over the corresponding material...
The high temperature properties of sintered silicon carbide are critically dependent on additives wh...
The densification process via hot pressing and gas pressure sintering, microstructure and the mechan...
By using different methods and processing techniques composites on the basis of Si3N4 were obtained....
The high temperature properties of sintered silicon carbide are critically dependent on additives wh...
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of...
Graduation date: 2008Nanostructured ceramics offer significant improvements in properties over the \...
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of...
The microstructure and the mechanical properties of SiCN-nanocomposites fabricated from different po...
Microstructure of sintered nanocrystalline SiC is studied by x-ray line profile analysis and transmi...
The activities presented here, were initiated by the publications of Niihara and Ishizaki. There, th...
Density, microstructure and microhardness have been investigated for samples, sintered from submicro...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
International audienceTwo SiC nanopowders with the average grain sizes of 16 nm and 45 nm were sinte...
Nanostructured ceramics offer significant improvements in properties over the corresponding material...
The high temperature properties of sintered silicon carbide are critically dependent on additives wh...
The densification process via hot pressing and gas pressure sintering, microstructure and the mechan...
By using different methods and processing techniques composites on the basis of Si3N4 were obtained....
The high temperature properties of sintered silicon carbide are critically dependent on additives wh...
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of...
Graduation date: 2008Nanostructured ceramics offer significant improvements in properties over the \...
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of...
The microstructure and the mechanical properties of SiCN-nanocomposites fabricated from different po...
Microstructure of sintered nanocrystalline SiC is studied by x-ray line profile analysis and transmi...
The activities presented here, were initiated by the publications of Niihara and Ishizaki. There, th...