Power speed reduction units for general aviation part 2: General design, optimum bearing selection for propeller driven aircrafts with piston engines

none2noThe power speed reduction unit (PSRU) is the device that is loaded by the generating unit and the thrusters. Propeller induced, gyroscopic and inertia loads are extremely important for PRSU bearing selection and life evaluation. Engine powers become easily a secondary factor for bearings and housing design. For this reason, it is important to select the best bearing assembly for the specific application with the required propeller. After a general discussion about PRSU and housing design, a very simplified method for bearing life calculation is introduced in this paper. It is based on similar, proven and extremely successful design of existing PRSUs. This method compares the life of this design with the new one. Aerobatics and general aviation loads are also compared. This paper demonstrates that the selection of a CFRP fixed pitch propeller for aerobatics keeps the load approximately to the same level of a general aviation aircraft. This is true in the case of plywood-reinforced off-the-shelf propeller for the general aviation load history. Aluminum alloy propellers are to be discarded for aerobatic use [1-2].nonePiancastelli, Luca*; Cassani, StefanoPiancastelli, Luca*; Cassani, Stefan