Preliminary design and numerical analysis of a scrap tires pyrolysis system

A plant prototype for whole scrap tires disposal and the consequent syngas production via pyrolysis has been developed. A numerical analysis on the innovative pyrolysis reactor, constituted by an autoclave closing device and an explosion-proof water system has been carried out. The aim of this analysis is to investigate the fluid-dynamics in the pyrolysis chamber and model the syngas production. The simulations, performed in the pre-realization system phase, have allowed to determine: i) the flow field of the fluid within the reactor, so as to optimize the geometry (e.g. size, vacuum system, water tank); ii) the temperature range, in order to determine the correct placement of thermocouples within reactor and prevent overheating that could compromise the safety of the system; iii) the pressure range, necessary to avoid the eventual flooding of the tires themselves. Thanks to these results, the test bench has been built at the CURTI S.p.A laboratory and experimental analysis has been performed. The experimental data are acquired and then elaborated, as shown in the pape