Add to ORKGThis work gives particular attention to substract-coating interface adherence of intermetallic compound formed by SHS technique
High temperature oxidation protection of alpha-titanium alloys is a fundamental aspect to be improve...
Microwaves at 2.45 GHz used to ignite the combustion synthesis of Ni and Al powder mixtures to produ...
Microwaves at 2.45 GHz have been used to ignite the self-propagating hightemperaturesynthesis (SHS) ...
This work gives particular attention to substract-coating interface adherence of intermetallic compo...
Promote the formation of a complex Ni-Al--Ti layer which enhances the NiAl coating adhesion to the T...
Microwave assisted SHS of NiAl compounds on Ti substrate in order to promote the formation of a comp...
Purpose – The paper aims to focus on microwave (2.45 GHz) assisted SHS (MA-SHS) preparation ofNiAl i...
To form coatings on titanium, combustion syntesys and self-propagating high-temperaure syntesys tech...
Increasing of oxidation resistance of aluminide coatings obtained by Microwave ignition temperature ...
Microwaves at 2.45 GHz have been used to ignite the Self propagating High temperature Synthesis (SHS...
none4Coatings by reactions synthesisnoneA.Casagrande; G.P.Cammarota; G.Poli; P.VeronesiA.Casagrande;...
A microwave applicator was used to ignite a SHS synthesis in a powder mixture to formed a NiAl coati...
Microwave can ignite the self-propagating high-temperature synthesis (SHS) in a 50/50 % Ni and Al Po...
Protective Ni-Aluminide coatings produced by microwave assisted SHS Synthesis of Ni, Al, Cr and Si ...
Microwaves at 2.45 GHz can ignite the self-propagating high-temperature synthesis (SHS) in a 50 at% ...
High temperature oxidation protection of alpha-titanium alloys is a fundamental aspect to be improve...
Microwaves at 2.45 GHz used to ignite the combustion synthesis of Ni and Al powder mixtures to produ...
Microwaves at 2.45 GHz have been used to ignite the self-propagating hightemperaturesynthesis (SHS) ...
This work gives particular attention to substract-coating interface adherence of intermetallic compo...
Promote the formation of a complex Ni-Al--Ti layer which enhances the NiAl coating adhesion to the T...
Microwave assisted SHS of NiAl compounds on Ti substrate in order to promote the formation of a comp...
Purpose – The paper aims to focus on microwave (2.45 GHz) assisted SHS (MA-SHS) preparation ofNiAl i...
To form coatings on titanium, combustion syntesys and self-propagating high-temperaure syntesys tech...
Increasing of oxidation resistance of aluminide coatings obtained by Microwave ignition temperature ...
Microwaves at 2.45 GHz have been used to ignite the Self propagating High temperature Synthesis (SHS...
none4Coatings by reactions synthesisnoneA.Casagrande; G.P.Cammarota; G.Poli; P.VeronesiA.Casagrande;...
A microwave applicator was used to ignite a SHS synthesis in a powder mixture to formed a NiAl coati...
Microwave can ignite the self-propagating high-temperature synthesis (SHS) in a 50/50 % Ni and Al Po...
Protective Ni-Aluminide coatings produced by microwave assisted SHS Synthesis of Ni, Al, Cr and Si ...
Microwaves at 2.45 GHz can ignite the self-propagating high-temperature synthesis (SHS) in a 50 at% ...
High temperature oxidation protection of alpha-titanium alloys is a fundamental aspect to be improve...
Microwaves at 2.45 GHz used to ignite the combustion synthesis of Ni and Al powder mixtures to produ...
Microwaves at 2.45 GHz have been used to ignite the self-propagating hightemperaturesynthesis (SHS) ...