Add to ORKGA filtering ADC used to implement the complete base-band in a receiver chain is presented. Passive filtering and in-band noise shaping lead to a frequency dependent dynamic range that better fits with the system requirements of a wireless receiver. The 90nm CMOS prototype is embedded in a fully integrated tuner compliant with DVB-T and ATSC standards. For a 6MHz channel bandwidth, the filtering ADC exhibits a frequency dependent dynamic range varying from 75.6dB to 90dB while drawing 30mA from a 1.8V supply
In this paper, a new self-tuning digital technique is reported for analog filters over VHF (very hig...
In order to meet the high data rate, low latency and high energy efficiency requirements, the future...
A whole-of-band receiver structure is proposed. In this structure, the whole mobile band (125 chann...
This paper describes a CMOS single chip IF-band converter (IFC) which is ap-plied in the analog fron...
Abstract—Receivers are being digitized in a quest for flexibility. Analog filters and programmable g...
A current-driven low-pass filter embedded in a sigma- delta analog-to-digital converter is presente...
This thesis targets cancellation of unwanted signals (blockers), one of the most difficult requireme...
A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning archi...
In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post...
Receivers are being digitized in a quest for flexibility. Analog filters and programmable gain stage...
With the increasing demand for high quality TV service, digital television (DTV) is replacing the co...
\u3cp\u3eThe trend towards wideband radio front-ends (RFE) for car radio receivers allows for digita...
modulator with 1.5-b quantizer and feedback digital-to-analog converter (DAC) for a universal mobile...
A lumped-element tunable pre-selection bandpass is presented that consists of three coupled resonato...
In this paper, noise-shaping gain-filtering techniques which minimize noise over the range of passba...
In this paper, a new self-tuning digital technique is reported for analog filters over VHF (very hig...
In order to meet the high data rate, low latency and high energy efficiency requirements, the future...
A whole-of-band receiver structure is proposed. In this structure, the whole mobile band (125 chann...
This paper describes a CMOS single chip IF-band converter (IFC) which is ap-plied in the analog fron...
Abstract—Receivers are being digitized in a quest for flexibility. Analog filters and programmable g...
A current-driven low-pass filter embedded in a sigma- delta analog-to-digital converter is presente...
This thesis targets cancellation of unwanted signals (blockers), one of the most difficult requireme...
A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning archi...
In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post...
Receivers are being digitized in a quest for flexibility. Analog filters and programmable gain stage...
With the increasing demand for high quality TV service, digital television (DTV) is replacing the co...
\u3cp\u3eThe trend towards wideband radio front-ends (RFE) for car radio receivers allows for digita...
modulator with 1.5-b quantizer and feedback digital-to-analog converter (DAC) for a universal mobile...
A lumped-element tunable pre-selection bandpass is presented that consists of three coupled resonato...
In this paper, noise-shaping gain-filtering techniques which minimize noise over the range of passba...
In this paper, a new self-tuning digital technique is reported for analog filters over VHF (very hig...
In order to meet the high data rate, low latency and high energy efficiency requirements, the future...
A whole-of-band receiver structure is proposed. In this structure, the whole mobile band (125 chann...