Film processability and properties of polycaprolactone/thermoplastic starch blends

In this work, the processing and properties of blown films prepared from thermoplastic corn starch (TPS) and polycaprolactone (PCL) were studied, in particular at high TPS content. The influence of processing parameters and material moisture content on the tensile properties was also studied. The results show that final film properties are mainly controlled by the draw ratio, blow-up ratio and PCL concentration in the blends. The results also show that PCL/TPS films are less hydrophilic as PCL content increases. Finally, it was found that a very narrow processing window exists for this blend. © 2011 Wiley Periodicals, Inc