Add to ORKGNew configurations of double slot CPW feed micromachined antennas arrays were realized on a 1.5um thin three-layer dielectric membrane fabricated on Si and GaAs substrates. The antennas were designed for 38 GHz operating frequenc
In recent years, there is an increased interest in the use of telecommunications systems operating a...
This paper presents the design, fabrication and characterization of a GaAs membrane-supported 60 GHz...
The fabrication of planar microwave devices is becoming very promising for many applications. It is ...
A new configuration of a double folded double slot CPW feed micromachined antenna array was realized...
This thesis represents a detailed investigation of high-frequency transmission lines which are suppo...
This paper presents the fabrication processes for micromachined millimetre-wave devices, on two diff...
In this paper, the technology for the realization of micromachined millimeter wave devices on dielec...
International audienceThe membrane technology appears as a convenient solution for high frequency ap...
The use of Polydimethylsiloxane (PDMS), an ultra flexible polymer, as a substrate for the realizatio...
This paper presents the manufacturing of micromachined Yagi-Uda antennae for applications in the mil...
A review of recent developments of membrane supported millimeter wave circuits based on GaAs microma...
International audienceThe membrane technology appears as a convenient solution for millimeterwave ap...
In the last years a lot of studies were focused on micromachining for high-performance microwave and...
International audienceA low cost technology based on FR4 and thin flexible Pyralux substrate to deve...
42nd European Microwave Conference, EuMC 2012 - Held as Part of 15th European Microwave Week, EuMW 2...
In recent years, there is an increased interest in the use of telecommunications systems operating a...
This paper presents the design, fabrication and characterization of a GaAs membrane-supported 60 GHz...
The fabrication of planar microwave devices is becoming very promising for many applications. It is ...
A new configuration of a double folded double slot CPW feed micromachined antenna array was realized...
This thesis represents a detailed investigation of high-frequency transmission lines which are suppo...
This paper presents the fabrication processes for micromachined millimetre-wave devices, on two diff...
In this paper, the technology for the realization of micromachined millimeter wave devices on dielec...
International audienceThe membrane technology appears as a convenient solution for high frequency ap...
The use of Polydimethylsiloxane (PDMS), an ultra flexible polymer, as a substrate for the realizatio...
This paper presents the manufacturing of micromachined Yagi-Uda antennae for applications in the mil...
A review of recent developments of membrane supported millimeter wave circuits based on GaAs microma...
International audienceThe membrane technology appears as a convenient solution for millimeterwave ap...
In the last years a lot of studies were focused on micromachining for high-performance microwave and...
International audienceA low cost technology based on FR4 and thin flexible Pyralux substrate to deve...
42nd European Microwave Conference, EuMC 2012 - Held as Part of 15th European Microwave Week, EuMW 2...
In recent years, there is an increased interest in the use of telecommunications systems operating a...
This paper presents the design, fabrication and characterization of a GaAs membrane-supported 60 GHz...
The fabrication of planar microwave devices is becoming very promising for many applications. It is ...