High-power, continuous-wave, scalable, single-frequency 852nm laser source for 213nm generation

We developed a high-power, continuous-wave (CW), single-frequency 852nm laser source, for the purpose of fourth harmonic generation at 213nm. Our approach is the doubly resonant sum-frequency mixing (DRSFM) with two fiber sources. An in-house single-frequency master oscillator at 1907nm is amplified by an in-house clad-pumped amplifier to 5W, and a commercial single-frequency master oscillator at 1540nm is amplified by a commercial amplifier to 10W. The two beams are combined via a dichroic mirror to a single beam before incident on a dual-wavelength resonator, consisting of one set of dual-wavelength mirrors. The external resonator is locked to the 1907nm laser frequency, and the frequency of the 1540nm is locked to the resonator, realizing double-resonance. With a periodically-poled stoichiometric lithium tantalate in the resonator, the sum-frequency at 852nm is efficiently generated. All 3 waves are in the same polarization (e-ray), allowing the effective use of Brewster-cut device, eliminating reflection loss for all wavelengths without any antireflection coatings. With 4.6W at 1907nm and 7.7W at 1540nm incident onto the resonator, 5.2W at 852nm was generated, representing the efficiency of greater than 40%. The experimental result indicates our current setup will be more efficient with higher input powers at 1907nm. With both fiber sources at 1540nm and 1907nm being scalable in output power, the output at 852nm is also scalable. By the forth harmonic of 852nm, 0.456 W CW 213nm was generated.New Energy and Industrial Technology Development Organization (NEDO) of JapanThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at repository@u.library.arizona.edu