Peroxide-based route for the synthesis of zinc titanate powder

In this work the thermodynamical solubility diagrams of zinc and titanium hydroxides were reviewed in order to determine the conditions for maximum degree of phase composition homogenization of precipitates. Experimental investigation of dependency of titanium peroxohydroxide solubility on solution acidity has been carried out and coprecipitation of zinc ions has been studied. It was concluded that precipitation by constant addition of mixed salts and base solutions into the mother liquor with constant acidity of pH 8.5 allows maximizing homogenization of precipitate composition. Thermal treatment process of mixed zinc and titanium hydroxides coprecipitated with hydrogen peroxide was studied using thermogravimetric analysis, differential thermal analysis and X-ray diffraction methods. It was found that precipitates of co-precipitated mixtures of zinc and titanium hydroxides contained impurities of salts precursors of the Zn (NO3)2 and TiOCl2 at a level of 1%. The experimental data demonstrate the influence of hydrogen peroxide on crystal growth rate of the zinc titanate during thermal treatment. The temperature ranges and kinetic parameters of hydroxide mixture dehydration, decomposition of the titanium peroxohydroxide and precursor impurities were determined