[[abstract]]The stress state of GaN epilayers transferred onto Si substrates through a Au-Si bonding process was studied by micro-Raman scattering and photoluminescence techniques. By increasing the Au bonding thickness from 1 to 40 μm, the high compressive stress state in GaN layer was relieved. A 10 μm Au bonding layer thickness is shown to possess the maximum compressive stress relief and also the deformation potential of the quantum well was found to be ~85 meV. A nonlinear parabolic relation between luminescent bandgap and the biaxial stress of the transferred GaN epilayer in the compressive region was observed.[[incitationindex]]SCI[[booktype]]紙
By die-attaching GaN-based light-emitting diodes (LEDs) on Si substrates with eutectic AuSn solder, ...
In semiconductor devices manufacturing, various materials with different physico-chemical characteri...
We report an investigation of strain effects in GaN layer grown on a Si (100) substrate. From tempe...
© 2007 American Institute of Physics. The electronic version of this article is the complete one and...
[[abstract]]Thin-GaN light-emitting diodes were fabricated by Au-Si wafer bonding and laser lift-off...
The stress states in unintentionally doped GaN epilayers grown on Si(111), 6H-SiC(0001), and c-plane...
[[abstract]]Using Au-Si wafer bonding and laser lift-off (LLO) techniques, an light emitting diode (...
Thermomechanical stress due to tensile and compressive strain is a critical aspect in packaging tech...
GaN-on-Si has become a useful fabrication route for many GaN devices and applications, but the mecha...
A compliant substrate approach has been employed to release lattice-mismatch caused strain in GaN ep...
Integrated circuits constitute a complex mosaic, where materials with different characteristics, gro...
In this article we have studied the existence of stress and strain in a Si-doped GaN (2µm)/sapphire ...
Thinning the buffer layer thickness between the GaN epilayer and Si substrate without introducing la...
International audienceThe stress distribution on crack free thick continuous GaN film (12 mu m) grow...
Bonding of LEDs on substrates by soldering or sintering induce stresses in the LEDs. Raman spectrosc...
By die-attaching GaN-based light-emitting diodes (LEDs) on Si substrates with eutectic AuSn solder, ...
In semiconductor devices manufacturing, various materials with different physico-chemical characteri...
We report an investigation of strain effects in GaN layer grown on a Si (100) substrate. From tempe...
© 2007 American Institute of Physics. The electronic version of this article is the complete one and...
[[abstract]]Thin-GaN light-emitting diodes were fabricated by Au-Si wafer bonding and laser lift-off...
The stress states in unintentionally doped GaN epilayers grown on Si(111), 6H-SiC(0001), and c-plane...
[[abstract]]Using Au-Si wafer bonding and laser lift-off (LLO) techniques, an light emitting diode (...
Thermomechanical stress due to tensile and compressive strain is a critical aspect in packaging tech...
GaN-on-Si has become a useful fabrication route for many GaN devices and applications, but the mecha...
A compliant substrate approach has been employed to release lattice-mismatch caused strain in GaN ep...
Integrated circuits constitute a complex mosaic, where materials with different characteristics, gro...
In this article we have studied the existence of stress and strain in a Si-doped GaN (2µm)/sapphire ...
Thinning the buffer layer thickness between the GaN epilayer and Si substrate without introducing la...
International audienceThe stress distribution on crack free thick continuous GaN film (12 mu m) grow...
Bonding of LEDs on substrates by soldering or sintering induce stresses in the LEDs. Raman spectrosc...
By die-attaching GaN-based light-emitting diodes (LEDs) on Si substrates with eutectic AuSn solder, ...
In semiconductor devices manufacturing, various materials with different physico-chemical characteri...
We report an investigation of strain effects in GaN layer grown on a Si (100) substrate. From tempe...