ASSESS MATERIAL PROPERTIES OF CONCRETE USING COMBINED NDT METHODS

The aim of this research is to assess the material properties of concrete like modulus of elasticity, compressive strength, and Poisson’s ratio using various nondestructive Testing (NDT) methods like Ultrasonic Pulse Velocity (UPV) and Rebound Hammer (RH). Assessment of material properties of concrete is very important as they are used for structural design process. Various NDT methods are applied to ensure the quality of concrete specimens but they can also be used to find material properties. UPV is a NDT method which is used to test the internal condition of the concrete specimen. RH is a surface hardness testing method and can be used to test the homogeneity of the specimen. For this study, several batches of concrete samples with three different design strengths of 6000 psi, 8000 psi, and 12000 psi were casted. Modulus of elasticity and Poisson’s ratio were calculated from UPV P-wave and S-wave velocities. A Nomogram was developed by combining the longitudinal ultrasonic pulse velocities, rebound numbers, and compressive strengths measured from UPV, RH, and compressive strength tests respectively. This combined NDT correlation curve (Nomogram) can be used to estimate compressive strength of concrete if UPV and rebound values are known. The accuracy of these NDT methods were determined by comparing estimated strength to the actual strength. Furthermore, the effect of moisture content on UPV and rebound values was reviewed and also studied dynamic modulus of elasticity and its relation with static modulus of elasticity of the concrete was investigated for better understanding