The processes of radiation-dynamic nature (in contrast to the thermally-activated processes) in the course of short-term irradiation of 1 mm thick bands of cold-worked aluminum alloy 1441 (of system Al-Li-Cu-Mg) with Ar+ 20-40 keV were studied. An effect of in-the-bulk (throughout the whole of metal bands thickness) low-temperature radiation annealing of the named alloy, multiply accelerated as compared with common thermal annealing processes was registered (with projected ranges of ions of considered energies definitely not exceeding 0.1 μm). The processes of recrystallization and intermetallic structure changes (occurring within a few seconds of Ar+ irradiation) have the common features as well as the differences in comparison with the re...
Part of the material in this report has appeared in the following Metallurgy Division Quarterly Repo...
The existing literature data shows that conventional aluminium alloys may not be suitable for use in...
We are trying to make new functional materials by the modification of local structure and character ...
The paper is concerned with Al-11,5% at Si alloy, monocrystalline aluminium. The purpose of the pape...
The changes in density and hardness as a result of annealing at temperatures up to 600 deg C are rep...
The effect of accelerated Ar+ ion beams with an energy of 10 keV on the microstructure and phase com...
It is well-known that the radiation defects, formed during ion implantation, have a strong effect on...
International audienceAluminum alloys are commonly used in nuclear research reactors, as there are k...
The effect of Ar+ ion irradiation on structural and phase transformations in a 1461 alloy (Al-Li-Cu-...
Al73Cu11Cr16 alloys were prepared by mechanical alloying of the irradiated by Ar ions elemental powd...
A partial report of this work has appeared in the following Metallurgy Division Progress Report : AN...
Irradiated specimens of 39 wt% U/sub 3/O/sub 8/ dispersed in aluminum and of aluminum-17.3 wt% urani...
In this work, the relationship between the microstructure and microhardness of Al–Mg–Li–Zr–Sc alloy ...
The effect of 20-40 keV Ar+ ion irradiation on the mechanical properties and structural and phase st...
Besides high temperature embrittlement by helium and swelling due to void formation, irradiation-ind...
Part of the material in this report has appeared in the following Metallurgy Division Quarterly Repo...
The existing literature data shows that conventional aluminium alloys may not be suitable for use in...
We are trying to make new functional materials by the modification of local structure and character ...
The paper is concerned with Al-11,5% at Si alloy, monocrystalline aluminium. The purpose of the pape...
The changes in density and hardness as a result of annealing at temperatures up to 600 deg C are rep...
The effect of accelerated Ar+ ion beams with an energy of 10 keV on the microstructure and phase com...
It is well-known that the radiation defects, formed during ion implantation, have a strong effect on...
International audienceAluminum alloys are commonly used in nuclear research reactors, as there are k...
The effect of Ar+ ion irradiation on structural and phase transformations in a 1461 alloy (Al-Li-Cu-...
Al73Cu11Cr16 alloys were prepared by mechanical alloying of the irradiated by Ar ions elemental powd...
A partial report of this work has appeared in the following Metallurgy Division Progress Report : AN...
Irradiated specimens of 39 wt% U/sub 3/O/sub 8/ dispersed in aluminum and of aluminum-17.3 wt% urani...
In this work, the relationship between the microstructure and microhardness of Al–Mg–Li–Zr–Sc alloy ...
The effect of 20-40 keV Ar+ ion irradiation on the mechanical properties and structural and phase st...
Besides high temperature embrittlement by helium and swelling due to void formation, irradiation-ind...
Part of the material in this report has appeared in the following Metallurgy Division Quarterly Repo...
The existing literature data shows that conventional aluminium alloys may not be suitable for use in...
We are trying to make new functional materials by the modification of local structure and character ...