Microscopic characterisation of photodetectors used in the hadron calorimeter of the Compact Muon Solenoid experiment

The Hybrid Photodetector (HPD) is a hybrid unit with a single accelerating gap between a common photocathode and an array of PIN diodes. Customised HPDs with 19 channels were used to detect scintillation light from hadron calorimeter in the Compact Muon Solenoid (CMS) experiment. In this paper, we present results on radiation damage studies carried out on the used HPDs in the outer hadron (HO) and the end-cap hadron (HE) calorimeter of the CMS experiment operating at CERN. The calorimeter is made of alternating layers of scintillating tiles and metals, such as brass or iron. The scintillating light was transmitted to the HPDs by means of optical fibres. Due to excessive exposure to scintillation light and ionising radiation during data taking at the Large Hadron Collider, the performance of the HPDs was expected to degrade significantly in the HE detector. Independent studies on radiation damage of these used photosensors were important to assess the degradation in the performance of the calorimeter. Microscopic scans of relative photon detection efficiencies for two HPDs (one each from HO and HE detector) were made using micron resolution optical scanner. The scanner was specially designed and built for microscopic characterisation of photosensors. Imprints of each fibre (∼1 mm in diameter) on the photocathode with varying damage within the same pixel of the HPD were observed. The localised damage of the photocathode was determined to vary with the amount of scintillation (or calibration) light transmitted by optical fibres to the HPD