Aggregation of a dense suspension of particles in a microwell using surface acoustic wave microcentrifugation

We investigate the aggregation of a dense suspension of particles (volume fraction, φ∼0.1 ) in a PDMS microwell by employing surface acoustic wave (SAW) microcentrifugation. In spite of acoustic attenuation at the LiNbO3PDMS interface, a significant portion of the energy (> 80%) is available for driving fluid actuation, and, in particular, microcentrifugation in the microwell via acoustic streaming. Rapid particle aggregation can then be affected in the microcentrifugation flow, arising as a consequence of the interplay between the hydrodynamic pressure gradient force Fp responsible for the migration of particles to the center of the microwell and shear-induced diffusion force FSID that opposes their aggregation. Herein, we experimentally investigated the combined effect of the particle size a and sample concentration c on these microcentrifugation flows. The experimental results show that particles of smaller size and lower sample concentration (such that Fp>FSID ) are concentrated efficiently into an equilibrium spot, whose diameter scales with the initial particle volume fraction as dcs∼φ0.3 . In contrast, we found that as the local particle volume fraction at the center of the microwell approaches φ∼0.1 such that FSID≥Fp , the particle aggregation fails. Additionally, we also investigate the effects of the well diameter, and the height, lateral positioning of microwell and the liquid volume on the microcentrifugation