International audienceThe Co-30wt.%-xC system was experimentally explored from x=0 to 2wt.%, by considering the stable microstructures at 1,000, 1,100 and 1,200°C, and the intervals of fusion. The strengthening potential and the refractoriness of several alloys belonging to this family were specified. Such simple alloys are able to display simultaneously a high amount of chromium for limiting hot corrosion, solidus temperatures as high as 1,300 °C and refractory carbides fractions that can reach 20 % in volume. Natures and fractions of carbides, and solidus temperatures were in good agreements with thermodynamic calculations. Inversely the measured liquidus temperatures were significantly higher than the calculated ones. In addition, thermo...
International audienceA high chromium content, typically 30wt.%, is generally considered as necessar...
Dans l’industrie permettant l’obtention des laines d’isolation, les superalliages base cobalt ou bas...
International audienceThe six alloys the thermal properties of which and the tendency to oxide spall...
International audienceThe Co-30wt.%-xC system was experimentally explored from x=0 to 2wt.%, by cons...
International audienceThe thermodynamic equilibria of alloys, based on Co, Ni, and Fe rich in chromi...
International audienceNine cast alloys reinforced by very high fractions of carbides, Ni-30Cr-xC, Co...
It is becoming increasingly clear that new materials that can operate at substantially higher temper...
The effect of carbon content (x = 0, 0.5, and 2.0 at.%) on the phase composition, microstructure, an...
International audienceCobalt and nickel may play antagonist roles on the microstructures and high te...
International audienceAs in the first part of this work thirteen alloys belonging to the Fe-30Cr-xC ...
International audienceThis study concerns three alloys based on cobalt, nickel or iron, all containi...
Chromium is widely used in superalloys, as alloying element able to improve their high temperature m...
International audienceSeveral cast strengthened superalloys, Ni base and Co base, were exposed to hi...
International audienceSix ternary Ni-30 wt.%Cr-xC alloys (x = 0.2 to 2.0) were oxidized at 1,000, 1,...
International audienceTantalum carbides (TaC) are classical strengthening particles, like chromium c...
International audienceA high chromium content, typically 30wt.%, is generally considered as necessar...
Dans l’industrie permettant l’obtention des laines d’isolation, les superalliages base cobalt ou bas...
International audienceThe six alloys the thermal properties of which and the tendency to oxide spall...
International audienceThe Co-30wt.%-xC system was experimentally explored from x=0 to 2wt.%, by cons...
International audienceThe thermodynamic equilibria of alloys, based on Co, Ni, and Fe rich in chromi...
International audienceNine cast alloys reinforced by very high fractions of carbides, Ni-30Cr-xC, Co...
It is becoming increasingly clear that new materials that can operate at substantially higher temper...
The effect of carbon content (x = 0, 0.5, and 2.0 at.%) on the phase composition, microstructure, an...
International audienceCobalt and nickel may play antagonist roles on the microstructures and high te...
International audienceAs in the first part of this work thirteen alloys belonging to the Fe-30Cr-xC ...
International audienceThis study concerns three alloys based on cobalt, nickel or iron, all containi...
Chromium is widely used in superalloys, as alloying element able to improve their high temperature m...
International audienceSeveral cast strengthened superalloys, Ni base and Co base, were exposed to hi...
International audienceSix ternary Ni-30 wt.%Cr-xC alloys (x = 0.2 to 2.0) were oxidized at 1,000, 1,...
International audienceTantalum carbides (TaC) are classical strengthening particles, like chromium c...
International audienceA high chromium content, typically 30wt.%, is generally considered as necessar...
Dans l’industrie permettant l’obtention des laines d’isolation, les superalliages base cobalt ou bas...
International audienceThe six alloys the thermal properties of which and the tendency to oxide spall...