Mechanical properties of the Ni75Al(25-x)Crx cast alloys and sinters were investigated using compression tests conducted within a wide range of compositions and temperature. The alloys and sinters exhibiting the best mechanical properties from a point of view of their intended use as constructional materials suitable for high-temperature applications were selected
The ordered intermetallic compound β-NiAl and its pseudo-binary off-eutectic alloys with 1 at.% tung...
The paper reports on the fabrication and mechanical properties of Ni3Al based alloy, which represent...
There is studied the possibility of using alloys of the Cr-Ni-Cо system as a metallic bond in produc...
Mechanical properties of the Ni75Al(25-x)Crx cast alloys and sinters were investigated using compres...
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidate...
The mechanical behavior of dual-phase NiAl(Cr) microstructures, consisting of elongated primary NiAl...
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidate...
This paper deals with the (Ni-Cr- xAl2O3) metallic composites (MCCs). Restraining of of thermal expa...
Chromium is widely used in superalloys, as alloying element able to improve their high temperature m...
The microstructural evolution of a powder metallurgy (PM) Ni 3Al-8Cr (at.%) alloy reinforced with Cr...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The processing and properties of chromium\u2013molybdenum, powder metallurgy steels with admixed ext...
Abstract : Sintering temperature is essential towards attaining desired densification and formation ...
This paper deals with the (Ni-Cr- xAl2O3) metallic composites (MCCs). Restraining of of thermal expa...
The ordered intermetallic compound β-NiAl and its pseudo-binary off-eutectic alloys with 1 at.% tung...
The paper reports on the fabrication and mechanical properties of Ni3Al based alloy, which represent...
There is studied the possibility of using alloys of the Cr-Ni-Cо system as a metallic bond in produc...
Mechanical properties of the Ni75Al(25-x)Crx cast alloys and sinters were investigated using compres...
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidate...
The mechanical behavior of dual-phase NiAl(Cr) microstructures, consisting of elongated primary NiAl...
Nickel aluminide intermetallic compounds possess attractive properties that make them good candidate...
This paper deals with the (Ni-Cr- xAl2O3) metallic composites (MCCs). Restraining of of thermal expa...
Chromium is widely used in superalloys, as alloying element able to improve their high temperature m...
The microstructural evolution of a powder metallurgy (PM) Ni 3Al-8Cr (at.%) alloy reinforced with Cr...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The article presents the results the impact of heat treatment on iron-n ickel alloys with adding Mo,...
The processing and properties of chromium\u2013molybdenum, powder metallurgy steels with admixed ext...
Abstract : Sintering temperature is essential towards attaining desired densification and formation ...
This paper deals with the (Ni-Cr- xAl2O3) metallic composites (MCCs). Restraining of of thermal expa...
The ordered intermetallic compound β-NiAl and its pseudo-binary off-eutectic alloys with 1 at.% tung...
The paper reports on the fabrication and mechanical properties of Ni3Al based alloy, which represent...
There is studied the possibility of using alloys of the Cr-Ni-Cо system as a metallic bond in produc...