The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

Calcium phosphate cements, and in particular hydroxyapatite cements, have been widely investigated for use as bone void fillers due to their chemical similarity to bone and related osteoconductivity. However, they are brittle, which limits their use to non-load-bearing applications. The aim of the current study was to improve the toughness of hydroxyapatite cements through fiber reinforcement. The effect of the addition of hydrophilic, poly(vinyl-alcohol) (PVA) fibers to hydroxyapatite cement was evaluated in terms of mechanical properties, including compressive strength, diametral tensile strength and toughness (work of fracture), as well as setting time, phase composition and cement morphology. The fiber reinforcement enhanced the fracture resistance of the hydroxyapatite cement, but also simultaneously reduced the compressive strength and setting time of the cements. However, cement with 5 wt % of fibers (of the powder component) could be considered a good compromise, with a compressive strength of 46.5 +/- 4.6 MPa (compared to 62.3 +/- 12.8 MPa of that without fibers), i.e., still much greater than that of human trabecular bone (0.1-14 MPa). A significantly higher diametral tensile strength (9.2 +/- 0.4 MPa) was found for this cement compared to that without fibers (7.4 +/- 1.5 MPa). The work of fracture increased four times to 9.1 +/- 1.5 kJ/m(2) in comparison to the pristine apatite. In summary, the hydroxyapatite cements could be reinforced by suitable amounts of PVA fibers, which resulted in enhancing the material's structural integrity and ductility, and increased the material's resistance to cracking